Lina Sarro

Publications

  1. Highly-sensitive wafer-scale transfer-free graphene MEMS condenser microphones
    Roberto Pezone; Sebastian Anzinger; Gabriele Baglioni; Hutomo Suryo Wasisto; Lina Sarro; Peter Steeneken; Sten Vollebregt;
    Microsystems & Nanoengineering,
    Volume 10, Issue 27, pp. 1-9, 2024. DOI: 10.1038/s41378-024-00656-x

  2. Manufacturing thin ionic polymer metal composite for sensing at the microscale
    Paul Motreuil-Ragot; Andres Hunt; Leandro N. Sacco; Pasqualina M. Sarro; Massimo Mastrangeli;
    Smart Materials and Structures,
    Volume 32, pp. 035006, 2023. DOI: 10.1088/1361-665X/acb305

  3. Microfabricated albedo insensitive sun position sensor system in silicon carbide with integrated 3D optics and CMOS electronics
    Joost Romijn; Sten Vollebregt; Vincent G. de Bie; Luke M. Middelburg; Brahim El Mansouri; Henk W. van Zeijl; Alexander May; Tobias Erlbacher; Johan Leijtens; Guoqi Zhang; Pasqualina M. Sarro;
    Sensors and Actuators A: Physical,
    Volume 354, pp. 114268, 2023. DOI: 10.1016/j.sna.2023.114268

  4. An organ-on-chip device with integrated charge sensors and recording microelectrodes
    Hande Aydogmus; Michel Hu; Lovro Ivancevic; Jean-Philippe Frimat; Arn M. J. M. van den Maagdenberg; Pasqualina M. Sarro; Massimo Mastrangeli;
    Scientific Reports,
    Volume 13, Issue 8062, 2023. DOI: https://doi.org/10.1038/s41598-023-34786-5

  5. Study on the controllability of the fabrication of single-crystal silicon nanopores/nanoslits with a fast-stop ionic current-monitored TSWE method
    Hao Hong; Jiangtao Wei; Xin Lei; Haiyun Chen; Pasqualina M. Sarro; Guoqi Zhang; Zewen Liu;
    Microsystems & Nanoengineering,
    Volume 9, pp. 63, 2023. DOI: 10.1038/s41378-023-00532-0

  6. Optical self-cooling of a membrane oscillator in a cavity optomechanical experiment at room temperature
    P. Vezio; M. Bonaldi; A. Borrielli; F. Marino; B. Morana; P.M. Sarro; E. Serra; F. Marin;
    Physical Review A,
    Volume 108, pp. 063508, 2023. DOI: 10.1103/PhysRevA.108.063508

  7. Low Noise Opto-Electro-Mechanical Modulator for RF-to-Optical Transduction in Quantum Communications
    Michele Bonaldi; Antonio Borrielli; Giovanni Di Giuseppe; Nicola Malossi; Bruno Morana; Riccardo Natali; Paolo Piergentili; Pasqualina Maria Sarro; Enrico Serra; David Vitali;
    Entropy,
    Volume 25, Issue 7, 2023. DOI: 10.3390/e25071087

  8. Miniaturized engineered heart tissues from hiPSC-derived triple cell type co-cultures to study human cardiac function
    L Windt; M. Wiendels; M. Dostanic; M. Bellin; P. M. Sarro; M. Mastrangeli; C. L. Mummery; B. J. van Meer;
    Biochemical and Biophysical Research Communications,
    2023. DOI: 10.1016/j.bbrc.2023.09.034

  9. Highly reproducible tissue positioning with tapered pillar design in engineered heart tissue platforms
    M. Dostanic; L. M. Windt; M. Wiendels; B. J. van Meer; C. L. Mummery; P. M. Sarro; M. Mastrangeli;
    In IEEE 36th Intl. Conf. on Micro Electro Mechanical Systems (MEMS2023),
    2023. DOI: 10.1109/MEMS49605.2023.10052166

  10. High-performance wafer-scale transfer-free graphene microphones
    Roberto Pezone; Gabriele Baglioni; Pasqualina M. Sarro; Peter G. Steeneken; Sten Vollebregt;
    In IEEE 36th Intl. Conf. on Micro Electro Mechanical Systems (MEMS2023),
    2023. DOI: 10.1109/MEMS49605.2023.10052360

  11. A Highly Sensitive Capacitive Displacement Sensor For Force Measurement Integrated In An Engineered Heart Tissue Platform
    Milica Dostanic; Filippo Pfaiffer; Mahdieh Shojaei-Baghini; Laura M. Windt; Maury Wiendels; Berend J. van Meer; Christine L. Mummery; Pasqualina M. Sarro; Massimo Mastrangeli;
    In 22nd International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS 2023),
    2023.

  12. Wafer-scale Transfer-free Graphene MEMS Condenser Microphones
    Roberto Pezone; Gabriele Baglioni; Leonardo di Paola; Pasqualina M. Sarro; Peter G. Steeneken; Sten Vollebregt;
    In 22nd International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS 2023),
    2023.

  13. Design And Fabrication Of A Smart Vaporasing Liquid Microthruster For Cubesat Applications
    Georgios Spernovasilis; Henk W. van Zeijl; Pasqualina M. Sarro;
    In 22nd International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS 2023),
    2023.

  14. High aspect-ratio multi-layer graphene MEMS condenser microphones
    Roberto Pezone; Gabriele Baglioni; Pasqualina M. Sarro; Peter G. Steeneken; Sten Vollebregt;
    In Graphene Week,
    2023.
    document

  15. Integrated Digital and Analog Circuit Blocks in a Scalable Silicon Carbide CMOS Technology
    Joost Romijn; Sten Vollebregt; Luke M. Middelburg; Brahim El Mansouri; Henk W. van Zeijl; Alexander May; Tobias Erlbacher; Guoqi Zhang; Pasqualina M. Sarro;
    IEEE Transactions on Electron Devices,
    Volume 69, Issue 1, pp. 4-10, 2022. DOI: 10.1109/TED.2021.3125279

  16. Rapid Prototyping of Organ-on-a-Chip Devices Using Maskless Photolithography
    Dhanesh G. Kasi; Mees N. S. de Graaf; Paul A. Motreuil-Ragot; Jean-Phillipe M. S. Frimat; Michel D. Ferrari; Pasqualina M. Sarro; Massimo Mastrangeli; Arn M. J. M. van den Maagdenberg; Christine L. Mummery; Valeria V. Orlova;
    Micromachines,
    Volume 13, pp. 49, 2022. DOI: 10.3390/mi13010049

  17. Sensitive Transfer-Free Wafer-Scale Graphene Microphones
    Roberto Pezone; Gabriele Baglioni; Pasqualina M. Sarro; Peter G. Steeneken; Sten Vollebregt;
    ACS Applied Materials & Interfaces,
    Volume 14, Issue 18, pp. 21705-21712, 2022. DOI: 10.1021/acsami.2c03305

  18. Direct Wafer-Scale CVD Graphene Growth under Platinum Thin-Films
    Yelena Hagendoorn; Gregory Pandraud; Sten Vollebregt; Bruno Morana; Pasqualina M. Sarro; Peter G. Steeneken;
    MDPI Materials,
    Volume 15, Issue 10, pp. 3723, 2022.
    document

  19. Angle Sensitive Optical Sensor for Light Source Tracker Miniaturization
    Joost Romijn; Secil Sanseven; Guoqi Zhang; Sten Vollebregt; Pasqualina M. Sarro;
    IEEE Sensors Letters,
    Volume 6, Issue 6, pp. 1-4, 2022. DOI: 10.1109/LSENS.2022.3175607

  20. Ultra-thin corrugated metamaterial film as large-area transmission dynode
    H.W. Chan; V. Prodanović; A.M.M.G. Theulings; T. ten Bruggencate; C.W. Hagen; P.M. Sarro; H. v.d. Graaf;
    Journal of Instrumentation,
    Volume 17, pp. P09027, 2022. DOI: 10.1088/1748-0221/17/09/P09027

  21. Integrated 64 pixel UV image sensor and readout in a silicon carbide CMOS technology
    Joost Romijn; Sten Vollebregt; Luke M. Middelburg; Brahim El Mansouri; Henk W. van Zeijl; Alexander May; Tobias Erlbacher; Johan Leijtens; Guoqi Zhang; Pasqualina M. Sarro;
    Nature Microsystems & Nanoengineering,
    Volume 8, pp. 114, 2022. DOI: 10.1038/s41378-022-00446-3

  22. Recording neuronal activity on chip with segmented 3D microelectrode arrays
    Nele Revyn; Michel. H. Y. Hu; Jean-Philippe M. S. Frimat; B. de Wagenaar; Arn M. J. M. van den Maagdenberg; Pasqualina M. Sarro; Massimo Mastrangeli;
    In 35th Intl. Conf. on Micro Electro Mechanical Systems (MEMS 2022),
    January 9-13 2022. DOI: 10.1109/MEMS51670.2022.9699597

  23. Visible Blind Quadrant Sun Position Sensor in a Silicon Carbide Technology
    Joost Romijn; Sten Vollebregt; Alexander May; Tobias Erlbacher; Henk W. van Zeijl; Johan Leijtens; GuoQi Zhang; Pasqualina M. Sarro;
    In 35th Intl. Conf. on Micro Electro Mechanical Systems (MEMS 2022),
    2022. DOI: 10.1109/MEMS51670.2022.9699533

  24. Wafer-Scale Transfer-Free Sensitive Graphene Microphones
    Roberto Pezone; G. Baglioni; P.M. Sarro; P.G. Steeneken; S. Vollebregt;
    In Graphene Week,
    2022.
    document

  25. Ionic polymer metal composite-based microfluidic flow sensor for bio-MEMS applications
    P. Motreuil-Ragot; G. Turcan; B. de Wagenaar; A. Hunt; P. M. Sarro; M. Mastrangeli;
    In IEEE SENSORS 2022,
    30 October - 2 November 2022. DOI: 10.1109/SENSORS52175.2022.9967281

  26. Analysis of Platinum Distribution within a Nafion 212 Membrane during Electroless Deposition
    P. Motreuil-Ragot; A. Hunt; L. N. Sacco; P. M. Sarro; M. Mastrangeli;
    In 242nd Electro Chemical Society Meeting,
    9-13 October 2022.

  27. Tapered pillars increase tissue position reproducibility in engineered heart tissue platforms
    M. Dostanic; L. M. Windt; J. M. Stein; B. J. Van Meer; C. L. Mummery; P. M. Sarro; M. Mastrangeli;
    In EUROoCS Conference 2022,
    4-5 July 2022.

  28. Ionic polymer metal composite (IPMC)-based micropump for organs-on-chip
    P. Motreuil-Ragot; D. Kasi; B. de Wagenaar; A. Hunt; V. Orlova; A. M. J. M. van den Maagdenberg; P. M. SARRO; M. Mastrangeli;
    In EUROoCS Conference 2022,
    4-5 July 2022.

  29. Hybrid Silicon-Polymer Multi-Modal Sensing Device for Organ-on-Chip
    H. Aydogmus; M. Hu; J.-P. Frimat; A. M. J. M. van den Maagdenberg; P. M. Sarro; M Mastrangeli;
    In EUROoCS Conference 2022,
    4-5 July 2022.

  30. Highly-Conformal Sputtered Through-Silicon Vias with Sharp Superconducting Transition
    J. A. Alfaro-Barrantes; M. Mastrangeli; D. J. Thoen; S. Visser; J. Bueno; J. J. A. Baselmans; P. M. Sarro;
    Journal of Microelectromechanical Systems,
    Volume 30, Issue 2, pp. 253-261, 2021. DOI: 10.1109/JMEMS.2021.3049822

  31. Multi-Layer Graphene Pirani Pressure Sensors
    Romijn, Joost; Dolleman, Robin; Singh, Manvika; van der Zant, Herre; Steeneken, Peter; Sarro, Pasqualina; Vollebregt, Sten;
    IOP Nanotechnology,
    Volume 32, Issue 33, pp. 335501, 2021. DOI: 10.1088/1361-6528/abff8e

  32. Influence of defect density on the gas sensing properties of multi-layered graphene grown by chemical vapor deposition
    Filiberto Ricciardella; Sten Vollebregt; Rita Tilmann; Oliver Hartwig; Cian Bartlam; Pasqualina M. Sarro; Hermann Sachdev; Georg S.Duesberg;
    Carbon Trends,
    Volume 3, pp. 100024, 2021.
    document

  33. Enhanced Sensitivity Pt/AlGaN/GaN Heterostructure NO₂ Sensor Using a Two-Step Gate Recess Technique
    Jianwen Sun; Teng Zhan; Robert Sokolovskij; Zewen Liu; Pasqualina M. Sarro; Guoqi Zhang;
    IEEE Sensors Journal,
    Volume 21, Issue 15, pp. 16475-16483, 2021. DOI: 10.1109/JSEN.2021.3082205

  34. Active feedback cooling of a SiN membrane resonator by electrostatic actuation
    A. Borrielli; M. Bonaldi; E. Serra; P. M. Sarro; B. Morana;
    Journal of Applied Physics,
    Volume 130, pp. 014502, 2021.
    document

  35. Towards a Scalable Sun Position Sensor with Monolithic Integration of the 3d Optics for Miniaturized Satellite Attitude Control
    J. Romijn; S. Vollebregt; H. W. van Zeijl; G. Zhang; J. Leijtens; P. M. Sarro;
    In 2021 IEEE 34th International Conference on Micro Electro Mechanical Systems (MEMS),
    pp. 642-645, Jan 2021. DOI: 10.1109/MEMS51782.2021.9375434

  36. Recording 3D neuronal activity on chip with segmented 3D microelectrode arrays
    N. Revyn; M. H. Y. Hu; J.-P. Frimat; A. M. J. M. van den Maagdenberg; P. M. Sarro; M. Mastrangeli;
    In EUROoCS Conference 2021,
    online, 1-2 July, 2021.

  37. FET-based integrated charge sensing in a MEM organ-on-chip platform
    H. Aydogmus; H. J. van Ginkel; A.-D. Galiti; M. H. Y. Hu; J.-P. Frimat; A. M. J. M. van den Maagdenberg; G.Q. Zhang; M. Mastrangeli; P. M. Sarro;
    In EUROoCS Conference 2021,
    online, 1-2 July, 2021.

  38. Dual-gate FET-based charge sensor enhanced by in-situ electrode decoration in a MEMS organs-on-chip platform
    H. Aydogmus; H. J. van Ginkel; A.-D. Galiti; M. Hu; J.-P. Frimat; A. van den Maagdenberg; G.Q. Zhang; M. Mastrangeli; P. M. Sarro;
    In 21st Int. Conf. on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS 2021),
    online, 20-25 June, 2021.

  39. An engineered heart tissue platform with integrated pacing microelectrodes
    M. Dostanic; L. Windt; J. Stein; B. van Meer; A. Diakou; C. L. Mummery; P. M. Sarro; M. Mastrangeli;
    In EUROoCS Conference 2021,
    online, 1-2 July, 2021.

  40. ForceTracker: A versatile tool for contractile force assessment in 3D organ-on-chip platforms
    J. M. Rivera-Arbelaez; M. Dostanic; J. M. Stein; A. van den Berg; L. I. Segerink; C. L. Mummery; P. M. Sarro; M. Mastrangeli; M. C. Ribeiro; R. Passier;
    In EUROoCS Conference 2021,
    online, 1-2 July, 2021.

  41. Microelectronmechanical organs-on-chip
    Massimo Mastrangeli; Hande Aydogmus; Milica Dostanic; Paul Motreuil-Ragot; Nele Revyn; Bjorn de Wagenaar; Ronald Dekker; Pasqualina M. Sarro;
    In 21st Int. Conf. on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS 2021),
    online, 20-25 June, 2021.

  42. Quantum Signature of a Squeezed Mechanical Oscillator
    A. Chowdhury; P. Vezio; M. Bonaldi; A. Borrielli; F. Marino; B. Morana; G. A. Prodi; P. M. Sarro; E. Serra; F. Marin;
    Physical Review Letters,
    Volume 124, pp. 023601, 2020. DOI: 10.1103/PhysRevLett.124.023601

  43. Low-Impedance PEDOT:PSS MEA Integrated in a Stretchable Organ-on-Chip Device
    Affan K. Waafi; Nikolas Gaio; William F. Quiros-Solano; Paul Dijkstra; Pasqualina M. Sarro; Ronald Dekker;
    IEEE Sensors,
    Volume 20, Issue 3, pp. 1150-1157, 2020. DOI: 10.1109/JSEN.2019.2946854

  44. Self-aligned micro-optic integrated photonic platform
    A. Jovic; N. Sanchez Losilla; J. Sancho Durá; K. Zinoviev; J. L. Rubio Guivernau; E. Margallo-Balbás; M. Mastrangeli; G. Pandraud; P. M. Sarro;
    Applied Optics,
    Volume 59, Issue 1, pp. 180-189, 2020. DOI: 10.1364/AO.59.000180

  45. Low-Humidity Sensing Properties of Multi-Layered Graphene Grown by Chemical Vapor Deposition
    Filiberto Ricciardella; Sten Vollebregt; Tiziana Polichetti; Pasqualina M. Sarro; Georg S. Duesberg;
    MDPI Sensors,
    Volume 20, Issue 11, pp. 3174, 2020.
    document

  46. Wafer-scale transfer-free process of multi-layered graphene grown by chemical vapor deposition
    Filiberto Ricciardella; Sten Vollebregt; Bart Boshuizen; F.J.K. Danzl; Ilkay Cesar; Pierpaolo Spinelli; Pasqualina Maria Sarro;
    Material Research Express,
    2020. DOI: 10.1088/2053-1591/ab771e

  47. The Impact of Gate Recess on the H2 Detection Properties of Pt-AlGaN/GaN HEMT Sensors
    Robert Sokolovskij; Jian Zhang; Hongze Zheng; Wenmao Li; Yang Jiang; Gaiying Yang; Hongyu Yu; Pasqualina M. Sarro; Guoqi Zhang;
    IEEE Sensors,
    Volume 20, Issue 16, pp. 8947-8955, 2020.
    document

  48. Superconducting High-Aspect Ratio Through-Silicon Vias with DC-Sputtered Al for Quantum 3D integration
    J. A. Alfaro-Barrantes; M. Mastrangeli; D. J. Thoen; S. Visser; J. Bueno; J. J. A. Baselmans; P. M. Sarro;
    IEEE Electron Device Letters,
    Volume 41, Issue 7, pp. 1114-1117, 2020. DOI: 10.1109/LED.2020.2994862

  49. A miniaturized EHT platform for accurate measurements of tissue contractile properties
    M. Dostanic; L. M. Windt; J. M. Stein; B. J. van Meer; M. Bellin; V. Orlova; M. Mastrangeli; C. L. Mummery; P. M. Sarro;
    Journal of Microelectromechanical Systems,
    Volume 29, Issue 5, pp. 881-887, July 2020. DOI: 10.1109/JMEMS.2020.3011196

  50. The influence of H2 and NH3 on catalyst nanoparticle formation and carbon nanotube growth
    R. Pezone; S. Vollebregt; P.M. Sarro; Sandeep Unnikrishnan;
    Carbon,
    Volume 170, pp. 384-393, 2020.
    document

  51. Low power AlGaN/GaN MEMS pressure sensor for high vacuum application
    Jianwen Sun; Dong Hu; Zewen Liu; Luke Middelburg; Sten Vollebregt; Pasqualina M. Sarro; Guoqi Zhang;
    Sensors and Actuators A: Physical,
    Volume 314, pp. 112217, 2020.
    document

  52. Quantum motion of a squeezed mechanical oscillator attained via an optomechanical experiment
    P. Vezio; A. Chowdhury; M. Bonaldi; A. Borrielli; F. Marino; B. Morana; G. A. Prodi; P. M. Sarro; E. Serra; F. Marin;
    Physical Review A,
    Volume 102, pp. 053505, 2020.
    document

  53. A high responsivity and controllable recovery ultraviolet detector based on a WO3 gate AlGaN/GaN heterostructure with an integrated micro-heater
    Sun, Jianwen; Zhang, Shuo; Zhan Teng; Liu, Zewen; Wang Junxi; Yi Xiaoyan; Li Jinmin; P. M. Sarro; GuoQi Zhang;
    Journal of Materials Chemistry C,
    Volume 8, Issue 16, pp. 5409-5416, 2020. DOI: 10.1039/D0TC00553C
    document

  54. FET-based charge sensor for organs-on-chip with in-situ electrode decoration
    H. Aydogmus; H. J. van Ginkel; M. Mastrangeli; GuoQi Zhang; P.M. Sarro;
    In International MicroNanoConference,
    December 2020.

  55. Enabling Actuation and Sensing in Organs-On-Chip Using Electroactive Polymers
    P. Motreuil-Ragot; A. Hunt; D. Kasi; B. Brajon; A. M. J. M. van den Maagdenberg; V. Orlova; M. Mastrangeli; P. M. Sarro;
    In IEEE 3rd International Conference on Soft Robotics (RoboSoft 2020),
    2020. DOI: 10.1109/RoboSoft48309.2020.9115977

  56. Fabrication of Al-based superconducting high-aspect ratio TSVs for quantum 3D integration
    J. A. Alfaro-Barrantes; M. Mastrangeli; D. J. Thoen; J. Bueno; J. J. A. Baselmans; P. M. Sarro;
    In IEEE Int. Conf. on Micro Electro Mechanical Systems (MEMS 2020),
    2020. DOI: 10.1109/MEMS46641.2020.9056165

  57. Miniaturized engineered heart tissues from human induced pluripotent cell-derived co-culture
    L. Windt; M. Dostanic; J. Stein; V. Meraviglia; G. Campostrini; M. Bellin; V. Orlova; M. Mastrangeli; P. M. Sarro; B. van Meer; C. Mummery;
    In EUROoCS Conference 2020,
    2020.

  58. A 3D microelectrode array to record neural activity at different tissue depths
    T. de Rijk; M. Hu; J.-P. Frimat; A. M. J. M. van den Maagdenberg; P. M. Sarro; M. Mastrangeli;
    In EUROoCS Conference 2020,
    July 2020.

  59. FET-based integrated charge sensor for organ-on-chip applications
    H. Aydogmus; M. Dostanic; M. Jahangiri; R. Sinha; W. F. Quiros-Solano; M. Mastrangeli; P. M. Sarro;
    In IEEE Sensors 2020,
    2020. DOI: 10.1109/SENSORS47125.2020.9278692

  60. Metal and Polymeric Strain Gauges for Si-Based, Monolithically Fabricated Organs-on-Chips
    Quirós-Solano, William F.; Gaio, Nikolas; Silvestri, Cinzia; Pandraud, Gregory; Dekker, Ronald; Sarro, Pasqualina M.;
    Micromachines,
    Volume 10, Issue 8, pp. 536, Aug 2019. DOI: 10.3390/mi10080536
    document

  61. Analysis of a calibration method for non-stationary CVD multi-layered graphene-based gas sensors
    Filiberto Ricciardella; Tiziana Polichetti; Sten Vollebregt; Brigida Alfano; Ettore Massera; Lina Sarro;
    IOP Nanotechnology,
    Volume 30, pp. 385501-1-8, 2019. DOI: 10.1088/1361-6528/ab2aac
    document

  62. Characterization of an Acetone Detector based on a Suspended WO3-Gate AlGaN/GaN HEMT Integrated with Micro-heater
    Jianwen Sun; Robert Sokolovskij; Elina Iervolino; Fabio Santagata; Zewen Liu; Pasqualina M. Sarro; GuoQi Zhang;
    IEEE Transactions on Electron Devices,
    2019. DOI: 10.1109/TED.2019.2936912
    document

  63. Growth of multi-layered graphene on molybdenum catalyst by solid phase reaction with amorphous carbon
    Filiberto Ricciardella; Sten Vollebregt; Evgenia Kurganova; A.J.M. Giesbers; Majid Ahmadi; Lina Sarro;
    2D Materials,
    Volume 6, pp. 035012, 2019. DOI: 10.1088/2053-1583/ab1518

  64. Calibrated quantum thermometry in cavity optomechanics
    Chowdhury, Avishek; Vezio, Paolo; Bonaldi, Michele; Borrielli, Antonio; Marino, Francesco; Morana, Bruno; Pandraud, Gregory; Pontin, Antonio; Prodi, Giovanni; Sarro, Lina; Serra, Enrico; Marin, Francesco;
    Quantum Science and Technology,
    2019.

  65. Suspended tungsten trioxide (WO3) gate AlGaN/GaN heterostructure deep ultraviolet detectors with integrated micro-heater
    Jianwen Sun; Teng Zhan; Zewen Liu; Junxi Wang; Xiaoyan Yi; Lina Sarro; GuoQi Zhang;
    Optics Express,
    Volume 27, Issue 25, 2019.
    document

  66. Suspended AlGaN/GaN HEMT NO2 Gas Sensor Integrated with Micro-heater
    Jianwen Sun; Robert Sokolovskija; Elina Iervolino; Zewen Liu; Pasqualina M. Sarro; GuoQi Zhang;
    Journal of Microelectromechanical Systems,
    2019.
    document

  67. MEMS Enabled Fast Time-Resolved X-Ray Diffraction Characterization Platform for Copper Nanoparticle Sintering in Heterogeneous Integration Applications
    Boyao Zhang; Jia Wei; Bottger, A. J.; van Zeijl, H. W.; Sarro, P. M.; GuoQi Zhang;
    In 20th International Conference on Solid-State Sensors, Actuators and Microsystems & Eurosensors XXXIII (TRANSDUCERS & EUROSENSORS XXXIII): Proceedings. Danvers: IEEE,
    2019. DOI: 10.1109/TRANSDUCERS.2019.8808192

  68. Wafer-scale integration of CVD graphene on CMOS devices using a transfer-free approach
    Sten Vollebregt; Joost Romijn; Henk W. van Zeijl; Pasqualina M. Sarro;
    In Graphene Week,
    2019.

  69. Free-standing, Transfer-free Graphene-based Differential Pressure Sensors
    R. Ramesha; S. Vollebregt; P.M. Sarro;
    In SAFE/ProRISC,
    2019.

  70. A miniaturized EHT platform for contractile tissue measurements
    M. Dostanic; L. Windt; J. Stein; B. van Meer; M. Mastrangeli; C. Mummery; P. M. Sarro;
    In International MicroNanoConference,
    Utrecht (NL), December 10-11, 2019.

  71. Transfer-free Graphene-based Differential Pressure Sensor
    Raghutham Ramesha; Sten Vollebregt; Lina Sarro;
    In Proc. IEEE NMDC,
    2019.

  72. Enabling actuation and sensing in organs-on-chip using electroactive polymers
    P. Motreuil-Ragot; A. Hunt; D. Kasi; B. Brajon; A. van den Maagdenberg; V. Orlova; M. Mastrangeli; P. M. Sarro;
    In International MicroNanoConference,
    Utrecht (NL), December 10-11, 2019.

  73. A wafer-scale process for the monolithic integration of CVD graphene and CMOS logic for smart MEMS/NEMS sensors
    Joost Romijn; Sten Vollebregt; Henk W. van Zeijl; Pasqualina M. Sarro;
    In IEEE 32nd International Conference on Micro Electro Mechanical Systems (MEMS). Piscataway: IEEE,
    2019. DOI: 10.1109/MEMSYS.2019.8870741

  74. Sensor applications for organ-on-chip platforms
    H. Aydogmus; M. Dostanic; M. Jahangiri; R. Sinha; W. F. Quiros-Solano; M. Mastrangeli; P. M. Sarro;
    In International MicroNanoConference,
    Utrecht (NL), December 10-11, 2019.

  75. Microengineered organs-on-chip
    H. Aydogmus; M. Dostanic; P. Motreuil-Ragot; M. Mastrangeli; P. M. Sarro;
    Poster, presented at QBio Symposium, Utrecht (NL), October 29, 2019.

  76. Full wafer transfer-free graphene
    Filiberto Ricciardella; Sten Vollebregt; Lina Sarro;
    Patent, WO2019125140; NL2020111, 2019.

  77. Effect of thermal annealing and chemical treatments on secondary electron emission properties of atomic layer deposited MgO
    Violeta Prodanovic; Hong Wah Chan; Anil U. Mane; Jeffrey W. Elam; Matthias M. Minjauw; Christophe Detavernier; Harry van der Graaf; Pasqualina M. Sarro;
    Journal of Vacuum Science and Technology A,
    Volume 36, Issue 6, pp. 06A102-1-9, 2018.
    document

  78. Microfabricated tuneable and transferable porous PDMS membranes for Organs-on-Chips
    W. F. Quirós-Solano; N. Gaio; O. M. J. A. Stassen; Y. B. Arik; C. Silvestri; N. C. A. Van Engeland; A. Van der Meer; R. Passier; C. M. Sahlgren; C. V. C. Bouten; A. van den Berg; R. Dekker; P. M. Sarro;
    Scientific Reports,
    pp. 13524, 2018. DOI: 10.1038/s41598-018-31912-6

  79. Advances in the electronics for cyclic voltammetry: the case of gas detection by using microfabricated electrodes
    Giorgio Pennazza; Marco Santonico; Luca Vollero; Alessandro Zompanti; Anna Sabatini; Nandeesh Kumar; Ivan Pini; William F Quiros Solano; Lina Sarro; Arnaldo D'Amico;
    Frontiers in Chemistry,
    Volume 6, pp. 327, 2018.
    document

  80. Carbon Nanotube Array: Scaffolding Material for Opto, Electro, Thermo, and Mechanical Systems
    Amir M. Gheytaghi; H. van Zeijl; S. Vollebregt; R.H. Poelma; C. Silvestri; R. Ishihara; G. Q. Zhang; P. M. Sarro;
    Innovative Materials,
    Volume 3, pp. 22-25, 2018.

  81. Quantum nondemolition measurement of optical field fluctuations by optomechanical interaction
    A Pontin; M Bonaldi; A Borrielli; L Marconi; F Marino; G Pandraud; GA Prodi; PM Sarro; E Serra; F Marin;
    Physical Review A,
    Volume 97, Issue 3, pp. 033833, 2018.

  82. A MEMS Actuator System for an Integrated 3-D Optical Coherent Tomography Scanner
    Aleksandar Jovic; Grégory Pandraud; Nuria Sanchez Losilla; Juan Sancho; Kirill Zinoviev; Jose Luis Rubio; Eduaro Margallo-Ballbas; Pasqualina M. Sarro;
    Journal of Microelectromechanical Systems,
    Volume 27, Issue 2, pp. 259-268, 2018.
    document

  83. Hydrogen sulfide detection properties of Pt-gated AlGaN/GaN HEMT-sensor
    Sokolovskij, R.; Zhang, J.; Iervolino, E.; Zhao, C.; Santagata, F.; Wang, F.; Yu, H.; Sarro, P. M.; GuoQi Zhang;
    Sensors and Actuators B: Chemical,
    2018. DOI: 10.1016/j.snb.2018.08.015

  84. Ultra-thin Alumina and Silicon Nitride MEMS Fabricated Membranes for the Electron Multiplication
    Violeta Prodanović; Hong Wah Chan; W A van der Graaf; Lina Sarro;
    Nanotechnology,
    Volume 29, pp. 155703, 2018.
    document

  85. MEMS-based multi-modal vibration energy harvesters for ultra-low power autonomous remote and distributed sensing
    Iannacci, J.; Serra, E.; Sordo, G.; Bonaldi, M.; Borrielli, A.; Schmid, U.; Bittner, A.; Schneider, M.; Kuenzig, T.; Schrag, G.; Pandraud, G.; Sarro, P. M.;
    Microsystem Technologies,
    pp. 5027-5036, 2018. DOI: 10.1007/s00542-018-3923-1

  86. Effects of Conformal Nanoscale Coatings on Thermal Performance of Vertically Aligned Carbon Nanotubes
    Cinzia Silvestri; Michele Riccio; René H. Poelma; Aleksandar Jovic; Bruno Morana; Sten Vollebregt; Andrea Irace; GuoQi Zhang; Pasqualina M. Sarro;
    Small,
    Volume 14, Issue 20, pp. 1800614, 2018. DOI: 10.1002/smll.201800614

  87. A Highly Miniaturized Single-chip MOMS Scanner for All-in-one Imaginging Solution
    A. Jovic; T. Uto; K. Hei; J. Sancho; N. Sanchez; K. Zinoviev; J.L. Rubio; E. Margallo; G. Pandraud; P.M. Sarro;
    In 31th IEEE International Conference on Micro Electro Mechanical Systems (MEMS),
    2018.

  88. A novel method to transfer porous PDMS membranes for high throughput Organ-on-Chip and Lab-on-Chip assembly
    William.F Quirós-Solano; Nikolas Gaio; Cinzia Silvestri; Oscar M. J. A. Arik; Yusuf, B. Stassen; Andries van der Meer; Carlijn V.C. Bouten; Albert van den Berg; Ronald Dekker; P.M. Sarro;
    In 31th IEEE International Conference on Micro Electro Mechanical Systems (MEMS),
    pp. 318-321, 2018.

  89. A transfer-free approach to wafer-scale graphene deposited by chemical vapour deposition
    Sten Vollebregt; Filiberto Ricciardella; Joost Romijn; Manvika Singh; Shengtai Shi; Lina Sarro;
    In Graphene Conference,
    2018. (invited).
    document

  90. Vacuum Assisted Liquified Metal (VALM) TSV Filling Method With Superconductive Material
    J.A. Alfaro; P.M. Sberna; C. Silvestri; M. Mastrangeli; R. Ishihara; P.M. Sarro;
    In 31th IEEE International Conference on Micro Electro Mechanical Systems (MEMS),
    2018. DOI: 10.1109/MEMSYS.2018.8346611

  91. A Multi Well Plate Organ-on-chip (Ooc) Device For In-vitro Cell Culture Stimulation And Monitoring
    N. Gaio; A. Waafi; M.L.H. Vlaming; E. Boschman; P. Dijkstra; P. Nacken; S.R. Braam; C. Boucsein; P.M. Sarro; R. Dekker;
    In 31th IEEE International Conference on Micro Electro Mechanical Systems (MEMS),
    2018.

  92. A Miniaturized Low Power Pirani Pressure Sensor Based on Suspended Graphene
    Joost Romijn; Sten Vollebregt; Robin J. Dolleman; Manvika Singh; Herre S.J. van der Zant; Peter G. Steeneken; Pasqualina M. Sarro;
    In Proceedings of IEEE NEMS,
    2018.

  93. Effect of droplet shrinking on surface acoustic wave response in microfluidic applications
    Thu Hang Bui; Van Nguyen; Sten Vollebregt; Bruno Morana; Henk van Zeijl; Trinh Chu Duc; P.M. Sarro;
    Applied Surface Science,
    Volume 426, pp. 253-261, 2017.
    document

  94. Liquid identification by using a micro-electro-mechanical interdigital transducer
    Thu Hang Bui; Bruno Morana; Atef Akhnoukh; Trinh Chu Duc; Pasqualina M Sarro;
    Analyst,
    Volume 142, Issue 5, pp. 763-771, 2017.

  95. Effects of graphene defects on gas sensing properties towards NO2 detection
    Filiberto Ricciardella; Sten Vollebregt; Tiziana Polichetti; Mario Miscuglio; Brigida Alfano; Maria L. Miglietta; Ettore Massera; Girolamo Di Francia; Pasqualina M. Sarro;
    Nanoscale,
    Volume 9, pp. 6085-6093, 2017.
    document

  96. CVD transfer-free graphene for sensing applications
    Chiara Schiattarella; Sten Vollebregt; Tiziana Polichetti; Brigida Alfano; Ettore Massera; Maria Lucia Miglietta; Girolamo Di Francia; Pasqualina Maria Sarro;
    Beilstein Journal of Nanotechnology,
    Volume 8, pp. 1015-1022, 2017.
    document

  97. A transfer-free wafer-scale method for the fabrication of suspended graphene beams for squeeze-film pressure sensors
    S. Vollebregt; R.J. Dolleman; H.S.J. van der Zant; P.G. Steeneken; P.M. Sarro;
    In Graphene Week,
    2017.

  98. An Innovative Approach to Overcome Saturation and Recovery Issues of CVD graphene-Based Gas Sensors
    F. Ricciardella; S. Vollebregt; T. Polichetti; B. Alfano; E. Massera; P. M. Sarro;
    In Proceedings of IEEE Sensors Conference,
    pp. 1224-1226, 2017.

  99. Integrated SiGe Detectors for Si Photonic Sensor Platforms
    Gregory Pandraud; Silvana Milosavljevic; Amir Sammak; Matteo Cherchi; Aleksandar Jovic; Pasqualina Sarro;
    In Proceedings of Eurosensors,
    pp. 559, 2017.

  100. Wafer-scale measurements of the specific contact resistance between different metals and mono- and multi-layer graphene
    S. Vollebregt; M. Singh; D.J. Wehenkel; R. van Rijn; P.M. Sarro;
    In Proc. of the 43rd international conference on Micro and Nanoengineering (MNE),
    pp. 152, 2017.

  101. Low Temperature CVD Grown Graphene for Highly Selective Gas Sensors Working under Ambient Conditions
    Filiberto Ricciardella; Sten Vollebregt; Tiziana Polichetti; Brigida Alfano; Ettore Massera; Pasqualina M. Sarro;
    In Proceedings of Eurosensors 2017,
    pp. 445, 2017.
    document

  102. Polymeric strain gauges as pressure sensor for microfabricated organ-on-chips
    W.F. Quiros Solano; N. Gaio; C. Silvestri; G. Pandraud; P.M. Sarro;
    In Proc.of Transducers 2017, the 19th International Conference on Solid-state Sensors, Actuators, and Microsystems,
    pp. 1296-1299, 2017.

  103. High sensitive CVD graphene-based gas sensors operating under environmental conditions
    Filiberto Ricciardella; Sten Vollebregt; Tiziana Polichetti; Brigida Alfano; Ettore Massera; Pasqualina M. Sarro;
    In Graphene Conference,
    2017.

  104. Ultra-thin ALD MGO membranes as mems transmission dynodes in a timed photon counter
    Violeta Prodanovic; Hong Wah Chan; Anil U Mane; Jeffrey W Elam; Harry VD Graaf; Pasqualina M Sarro;
    In Micro Electro Mechanical Systems (MEMS), 2017 IEEE 30th International Conference on,
    pp. 740-743, 2017.

  105. Horizontally aligned carbon nanotube scaffolds for freestanding structures with enhanced conductivity
    Cinzia Silvestri; Federico Marciano; Bruno Morana; Violeta Podranovic; Sten Vollebregt; GuoQi Zhang; Pasqualina M Sarro;
    In Micro Electro Mechanical Systems (MEMS), 2017 IEEE 30th International Conference on,
    pp. 266-269, 2017.

  106. Two novel MEMS actuator systems for self-aligned integrated 3D optical coherent tomography scanners
    Aleksandar Jovic; Gregory Pandraud; Nuria Sanchez; Juan Sancho; Kirill Zinoviev; Jose L Rubio; Eduardo Margallo; Pasqualina M Sarro;
    In Micro Electro Mechanical Systems (MEMS), 2017 IEEE 30th International Conference on,
    pp. 797-800, 2017.

  107. Pt-AlGaN/GaN HEMT-Sensor for Hydrogen Sulfide (H2S) Detection
    R Sokolovskij; E Iervolino; C Zhao; F Santagata; F Wang; H Yu; PM Sarro; GuoQi Zhang;
    In Proceedings of Eurosensors,
    pp. 463, 2017.

  108. Suspended graphene beams with tunable gap for squeeze-film pressure sensing
    S. Vollebregt; R.J. Dolleman; H.S.J. van der Zant; P.G. Steeneken; P.M. Sarro;
    In Proc.of Transducers 2017, the 19th International Conference on Solid-state Sensors, Actuators, and Microsystems,
    pp. 770-773, 2017.

  109. Potential applications of electron emission membranes in medicine
    Yevgen Bilevych; Stefan E. Brunner; Hong Wah Chan; Edoardo Charbon; Harry van der Graaf; Cornelis W. Hagen; Gert Nützelf; Serge D. Pintof; Violeta Prodanović; Daan Rotman; Fabio Santagata; Lina Sarro; Dennis R. Schaar;
    Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment,
    Volume 809, pp. 171-174, 2016.

  110. SiNW-FET in-Air Biosensors for High Sensitive and Specific Detection in Breast Tumor Extract
    F. Puppo; M.-A. Doucey; J.-F. Delaloye; T.S.Y. Moh; G. Pandraud; P.M. Sarro; G. De Micheli; S. Carrara;
    IEEE Sensors Journal,
    Volume 16, Issue 10, pp. 3374-3381, 2016.
    document

  111. A mixing surface acoustic wave device for liquid sensing applications: Design, simulation, and analysis
    T.H. Bui; B. Morana; T. Scholtes; T. Chu Duc; P.M. Sarro;
    Journal of Applied Physics,
    Volume 120, Issue 7, pp. 074504, 2016.

  112. The Tynode: A new vacuum electron multiplier
    Harry van der Graaf; Hassan Akhtar; Neil Budko; Hong Wah Chan; Cornelis W. Hagen; Conny C.T. Hansson; Gert Nützel; Serge D. Pinto; Violeta Prodanović; Behrouz Raftari; Pasqualina M. Sarro; John Sinsheimer; John Smedle;
    Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment,
    2016.
    document

  113. Cytostretch, an Organ-on-Chip Platform
    Gaio, N.; van Meer, B.; Quiros Solano, W.; Bergers, L.; van de Stolpe, A.; Mummery, C.; Sarro, P.M.; Dekker, R.;
    Micromachines,
    Volume 7, Issue 7, pp. 120, 2016.

  114. Control of recoil losses in nanomechanical SiN membrane resonators
    A. Borrielli; L. Marconi; F. Marin; F. Marino; B. Morana; G. Pandraud; A. Pontin; G. A. Prodi; P. M. Sarro; E. Serra; M. Bonaldi;
    Physical Review B,
    Volume 94, pp. 121403, 2016.

  115. Thermal characterization of carbon nanotube foam using MEMS microhotplates and thermographic analysis
    Cinzia Silvestri; Michele Riccio; Rene Poelma; Bruno Morana; Sten Vollebregt; Fabio Santagata; Andrea Irace; GuoQi Zhang; Pasqualina M. Sarro;
    Nanoscale,
    Volume 8, pp. 8266-8275, 2016.
    document

  116. Microfabrication of large-area circular high-stress silicon nitride membranes for optomechanical applications
    E. Serra; M. Bawaj; A. Borrielli; G. Di Giuseppe; S. Forte; N. Kralj; N. Malossi; L. Marconi; F. Marin; F. Marino; B. Morana; R. Natali; G. Pandraud; A. Pontin; G. A. Prodi; M. Rossi; P. M. Sarro; D. Vita;
    AIP Advances,
    Volume 6, pp. 065004, 2016.

  117. Dynamical two-mode squeezing of thermal fluctuations in a cavity opto-mechanical system
    A. Pontin; M. Bonaldi; A. Borrielli; L. Marconi; F. Marino; G. Pandraud; G. A. Prodi; P.M. Sarro; E. Serra; F. Marin;
    Physical Review Letters,
    Volume 116, pp. 103601, 2016.

  118. Stretchable Binary Fresnel Lens for Focus Tuning
    Xueming Li; Lei Wei; Ren� H. Poelma; Sten Vollebregt; Jia Wei; Hendrik Paul Urbach; Pasqualina M. Sarro; GuoQi Zhang;
    Scientific Reports,
    Volume 6, pp. 25348, 2016.

  119. Mass sensitivity of aluminum nitride thin film based surface acoustic wave sensors prepared for biosensing application
    Ying-ge Li; Lian-xiang Ma; P. M. Sarro; Dong-xing Du; Xue-feng Liu;
    In Symposium on Piezoelectricity, Acoustic Waves, and Device Applications (SPAWDA),
    pp. 368-370, 2016.

  120. PEDOT:PDMS: a conductive and flexible polymer for sensor integration in Organ-on-Chip platforms
    W.Quiros Solano; N.Gaio; C. Silvestri; G. Pandraud; P.M. Sarro;
    In Procedia Engineering: Proceedings of the 30th anniversary Eurosensors Conference,
    pp. 1184-1187, 2016.

  121. A calorimetry-based measurement apparatus for switching losses in high power electronic devices
    D. Iero; F.G. Della Corte; G. Fiorentino; P.M. Sarro;
    In IEEE International Energy Conference,
    pp. 1-5, 2016.

  122. Characterization of Thermal Expansion Coefficient of LPCVD Polycrystalline SiC Thin Films Using Two Section V-beam Actuators
    S. Thomas; A. Jovic; B. Morana; F. Buja; A. Gkouzou; G. Pandraud; P.M. Sarro;
    In Procedia Engineering: Proceedings of the 30th anniversary Eurosensors Conference,
    pp. 1144-1147, 2016.
    document

  123. High sensitive gas sensors realized by a transfer-free process of CVD graphene
    Filiberto Ricciardella; Sten Vollebregt; Tiziana Polichetti; Brigida Alfano; Ettore Massera; Lina Sarro;
    In Proceedings of the IEEE Sensors conference,
    2016.

  124. Effect of the interruption of the propagation path on the response of surface acoustic wave transducers
    Thu Hang Bui; An Tran; Bruno Morana; Jia Wei; Trinh Chu Duc; P.M. Sarro;
    In Proceedings of the IEEE Sensors conference,
    2016.

  125. A predefined wafer-scale CVD graphene deposition method requiring no transfer
    Sten Vollebregt; Lina Sarro;
    In Graphene Week,
    2016.

  126. All-SiC surface micromachined nanoreactor for in-situ transmission electron microscopy
    B. Morana; C. Silvestri; J.F. Creemer; P.M. Sarro;
    In Proc. of the 29th IEEE International Conference of Micro Electro Mechanical Systems,
    pp. 753-756, 2016.

  127. Fabrication process of Si microlenses for OCT systems
    A. Jovic; G. Pandraud; K. Zinoviev; J. L. Rubio; E. Margallo; P. M. Sarro;
    In Proc. SPIE 9888, Micro-Optics,
    2016.
    document

  128. A novel mixing surface acoustic wave device for liquid sensing applictions
    Thu Hang Bui; B, Morana; T. Scholtes; T. Chu Duc; P.M. Sarro;
    In Proc. of the 29th IEEE International Conference of Micro Electro Mechanical Systems,
    pp. 745-748, 2016.

  129. A transfer-free wafer-scale CVD graphene fabrication process for MEMS/NEMS sensors
    S. Vollebregt; B. Alfano; F. Ricciardella; A.J.M. Giesbers; Y. Grachova; H.W. van Zeijl; T. Polichetti; P.M. Sarro;
    In Proc. of the 29th IEEE International Conference of Micro Electro Mechanical Systems,
    pp. 17-20, 2016.

  130. SiNW-FET in-Air Biosensors for High Sensitive and Specific Detection in Breast Tumor Extract
    Puppo, F.; Doucey, Marie-Agnes; Delaloye, Jean-Francois; Moh, T.S.Y.; Pandraud, G.; Sarro, P.M.; De Micheli, G.; Carrara, S.;
    IEEE Sensors Journal,
    2015.

  131. Low loss single-crystal silicon mechanical resonators for the investigation of thermal noise statistical properties
    E.Serra; M. Bonaldi; A.Borrielli; L.Conti; G. Pandraud; P. M. Sarro;
    Sensors and Actuators A: Physical,
    Volume 227, pp. 48-54, 2015.

  132. Impact of the atomic layer deposition precursors diffusion on solid-state carbon nanotube based supercapacitors performances
    G Fiorentino; S Vollebregt; FD Tichelaar; R Ishihara; PM Sarro;
    IOP Nanotechnology,
    Volume 26, Issue 6, pp. 064002, 2015.
    document

  133. Fabrication and characterization of low loss MOMS resonators for cavity opto-mechanics
    E. Serra; M. Bonaldi; A. Borrielli; F. Marin; L. Marconi; F. Marino; G. Pandraud; A. Pontine; G.A. Prodi; P.M. Sarro;
    Microelectronic Engineering,
    2015.
    document

  134. Ingredients for sensors science
    Arnaldo D'Amicoa; Corrado Di Natalea; Pasqualina M. Sarro;
    Sensors and Actuators B: Chemical,
    Volume 207, pp. 1060-1068, 2015.

  135. Structured film for compensation of anthropogenic radiative forcing
    G. Vdovin; P.M. Sarro; O. Soloviev; M. Loktev; R. Angel;
    Optics Letters,
    2015.

  136. A measurement apparatus for switching losses based on an heat-flux sensor
    Iero, Demetrio; Della Corte, Francesco G.; Fiorentino, Giuseppe; Sarro, Pasqualina M.; Morana, B.;
    In AISEM Annual Conference,
    pp. 1-4, 2015.

  137. Molybdenum grown CVD graphene Schottky diodes
    S. Vollebregt; F. Ricciardella; Y. Grachova; T. Polichetti; P.M. Sarro;
    In Graphene Week,
    2015.

  138. Tunable binary fresnel lens based on stretchable PDMS/CNT compsite
    Xueming Li; L. Wei; S. Vollebregt; R. Poelma; Y. Shen; Jia Wei; P. Urbach; P.M. Sarro; GuoQi Zhang;
    In Transducers,
    pp. 2041-2044, 2015.

  139. Silicon-PDMS optofluidic integration
    Testa Genni; Gianluca Persichetti; Pasqualina M. Sarro; Romeo Bernini;
    In Proc. SPIE 9367, Silicon Photonics X,
    pp. 936718, 2015.

  140. Optimization of Silicon-rich Silicon Nitride Films for Electron Multiplication in Timed Photon Counters
    V. Prodanovic; H.W. Chan; J. Smedley; A. Theulings; S. Tao; H.v.d. Graaf; P.M. Sarro;
    In Procedia Engineering 120: EUROSENSORS 2015,
    pp. 1111-1114, 2015.

  141. Crystallinity variations over the length of vertically aligned carbon nanotubes grown by chemical vapour deposition
    S. Vollebregt; P. Padmanabhan; C. Silvestri; P.M. Sarro;
    In 41st Micro and Nano Engineering conference,
    2015.

  142. The Role of Edge Defects in Liquid Phase Exfoliated and Chemical Vapor Deposited Graphene for NO2 Detection
    F Ricciardella; S Vollebregt; T Polichetti; B Alfano; PM Sarro; ML Miglietta; E Massera; G Di Francia;
    In GraphITA,
    2015.

  143. SAW device for liquid vaporization rate and remaining molecule sensing
    Thu Hang Bui; Bruno Morana; An Tran; Tom Scholtes; Trinh Chu Duc; Pasqualina M. Sarro;
    In IEEE Sensors Conference,
    2015.

  144. On-chip double slot antenna at 300 GHz enhanced by artificial dielectrics
    Syed, W. H.; Fiorentino, G.; Cavallo, D.; Sarro, P. M.; Neto, A.;
    In Eur. Conf. Antennas Propag.,
    2015.

  145. Performance enhancement of 300 GHz on-chip double slot antenna by means of artificial dielectrics
    Syed, W. H.; Fiorentino, G.; Cavallo, D.; Sarro, P. M.; Neto, A.; Lager, I. E.;
    In 45th European Microwave Conference,
    2015.

  146. Wafer-level fabrication of strain gauges on PDMS membranes for low-pressure sensing
    William Quiros Solano; Gregory Pandraud; Pasqualina M. Sarro;
    In IEEE Sensors Conference,
    2015.

  147. Fabrication and application of temperature triggered MEMS switch for active cooling control in solid state lighting system
    Huaiyu Ye; Jai Wei; van Zeijl, HW; Sarro, PM; GuoQi Zhang;
    Microelectronics Reliability,
    Volume 54, Issue 6-7, pp. 1338-1343, 2014.

  148. Multi-modal vibration based MEMS energy harvesters for ultra-low power wireless functional nodes
    Iannacci, J; Serre, E; Di Criscienzo, R; Sordo, G; Gottardi, M; Borrielli, A; Bonaldi, M; Kuenzig, T; Schrag, G; Pandraud, G; Sarro, PM;
    Microsystem Technologies: micro and nanosystems - information storage and processing systems,
    Volume 20, Issue 4-5, pp. 627-640, 2014.

  149. Stiction-Induced Sealing of Surface Micromachined Channels
    B Morana; RH Poelma; G Fiorentino; J Wei; JF Creemer; PM Sarro;
    Journal of Microelectromechanical Systems,
    Volume 23, Issue 2, pp. 459-470, 2014.
    document

  150. A hybrid silicon-PDMS optofluidic platform for sensing applications
    Testa, G; Persichetti, G; Sarro, PM; Bernini, R;
    Biomedical Optics Express,
    Volume 5, Issue 2, pp. 417-426, 2014.

  151. Design of silicon micro-resonators with low mechanical and optical losses for quantum optics experiments
    Borrielli, A; Bonaldi, M; Serre, E; Bagolini, A; Bellutti, P; Cataliotti, FS; Marin, F; Marino, F; Pontin, A; Prodi, GA; Pandraud, G; Sarro, PM; Lorito,; Zoumpoulidis, T;
    Microsystem Technologies,
    Volume 20, Issue 4-5, pp. 907-917, 2014.

  152. High Sensitive Detection in Tumor Extracts with SiNW-FET in-Air Biosensors
    F. Puppo; M.-A. Doucey; J.-F. Delaloye; T.S.Y. Moh; G. Pandraud; P.M. Sarro; G. De Micheli; S. Carrara;
    In IEEE Sensors,
    pp. 866-869, 2014.

  153. Associated IDTs in Surface Acoustic Wave Devices for Closed-loop Control Inkjet System
    Thu Hang Bui; T. Bui Duc; T. Chu Duc; P.M. Sarro;
    In IEEE Sensors,
    pp. 1936-1939, 2014.

  154. Numerical modeling of flexible actuator for dynamic lighting
    Teng Ma; Xueming Li; Jia Wei; GuoQi Zhang; P. M. Sarro;
    In 15th International Conference on thermal, mechanical and multi-physics simulation and experiments in microelectronics and microsystems,
    2014.

  155. Selective coating deposition on high Q single crystal silicon resonators for the investigation og thermal nois statistical properties
    E. Serra; M. Bonaldi; A. Borrielli; L. Conti; G. Pandraud; P.M. Sarro;
    In Procedia Engineering 87: EUROSENSORS 2014, the 28th European Conference on Solid-State Transducers,
    pp. 1485-1488, 2014.

  156. Developing High-Optical Quality Silicon Resonators Working in the Quantum Regime
    E. Serra, M. Bonaldi, A. Borrielli, F. Marin, L. Marconi, F. Marino, G. Pandraud, A. Pontin, G.A. Prodi; P.M. Sarro;
    In 40th Micro and Nano Engineering Conference,
    2014.

  157. Electro-thermal simulation and characterization of vertically aligned CNTs directly grown on a suspended microhoplate for thermal management applications
    C. Silvestri; P. Piacciafoco; B. Morana; F. Santagata; GuoQi Zhang; P.M. Sarro;
    In IEEE Sensors,
    pp. 827-830, 2014.
    document

  158. Front-to-back ratio enhancement of on-chip antenna using artificial dielectrics at 300 GHz
    Syed, WH; Fiorentino, G; Cavallo, D; Spirito, M; Neto, A; Sarro, PM;
    In Proceedings - 2014 USNC-URSI Radio Science Meeting (Joint with AP-S Symposium),
    pp. 140, 2014.

  159. Miniaturized particulate matter sensor for portable air quality monitoring devices
    Xueming Li; E Iervolino; F Santagata; Jia Wei; Cadmus Yuan; PM Sarro; GuoQi Zhang;
    In IEEE Sensors,
    pp. 2151-2154, 2014.

  160. High Quality Wafer-scale CVD Graphene on Molybdenum Thin Film for Sensing Application
    Yelena Grachova; Sten Vollebregt; Andrea Leonardo Lacaita; Pasqualina M. Sarro;
    In Procedia Engineering 87: EUROSENSORS 2014, the 28th European Conference on Solid-State Transducers,
    pp. 1501-1504, 2014.
    document

  161. Artificial Dielectric Layer Based on PECVD Silicon Carbide for Terahertz Sensing Applications
    G. Fiorentino; W. Syed; A. Adam; A. Neto; P.M. Sarro;
    In Procedia Engineering 87: EUROSENSORS 2014, the 28th European Conference on Solid-State Transducers,
    pp. 1497-1500, 2014.

  162. Optofluidic hybrid platform with integrated solid core waveguides
    Testa, G; Persichetti, G; Sarro, PM; Bernini, R;
    In Proceedings of SPIE - Integrated Optics: Devices, Materials and Technologies XVIII Vol. 8988. Proceedings of SPIE- International Society for Optical Engineering,
    pp. 1-6, 2014.

  163. Enhancement of Front to Back Ratio of on Chip Antenna by Artificial Dielectrics at 300 GHz
    Syed, WH; Fiorentino, G; Cavallo, D; Spirito, M; Neto, A; Sarro, PM;
    In 39th International Conference on Infrared, Millimeter, and Terahertz Waves,
    2014.

  164. 3D solid-state supercapacitors obtained by ALD coating of high-density carbon nanotubes bundles
    Fiorentino, Giuseppe; Vollebregt, Sten; Tichelaar, FD; Ishihara, Ryoichi; Sarro, Pasqualina M;
    In Micro Electro Mechanical Systems (MEMS), 2014 IEEE 27th International Conference on,
    IEEE, pp. 342--345, 2014.

  165. CNT bundles growth on microhotplates for direct measurement of their thermal properties
    C. Silvestri; B. Morana; G. Fiorentino; S. Vollebregt; G. Pandraud; F. Santagata; GuoQi Zhang; P.M. Sarro;
    In 27th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2014),
    San Francisco, USA, Jan. 2014.
    document

  166. MEMS-Based Multi-Modal Vibration Energy Harvesters for Ultra-Low Power Autonomous Remote and Distributed Sensing
    Jacopo Iannacci; Enrico Serra; Guido Sordo; Michele Bonaldi; Antonio Borrielli; Ulrich Schmid; Achim Bittner; Michael Schneider; Thomas Kuenzig; Gabriele Schrag; Gregory Pandraud; Pasqualina Sarro;
    In 14th Mechatronics Forum International Conference,
    2014.

  167. Characterization of low temperature deposited atomic layer deposition TiO2 for MEMS applications
    Yujian Huang; Gregory Pandraud; Pasqualina M. Sarro;
    Journal of Vacuum Science & Technology A,
    Volume 31, Issue 1, pp. 01A148, 2013.

  168. Resonance frequency of locally heated cantilever beams
    E. Iervolino; M. Riccio; F. Santagata; J. Wei; A.W. van Herwaarden; A. Irace; G. Breglio; P.M. Sarro;
    Sensors and Actuators A,
    Volume 190, pp. 6-12, Feb. 2013. DOI 10.1016/j.sna.2012.10.008.

  169. Fully back-end TSV process by Cu electro-less plating for 3D smart sensor systems
    F. Santagata; C. Farriciello; G. Fiorentino; H.W. van Zeijl; C. Silvestri; GuoQi Zhang; P.M. Sarro;
    Journal of Micromechanics and Microengineering,
    2013.

  170. A CMOS-compatible metamaterial to enhance the front to back radiation ratio in terahertz antenna for sensing application
    Fiorentino, G; Syed, W; Santagata, F; Spirito, M; Pandraud, G; Neto, A; Sarro, PM; Adam, AJL;
    In Sensors, 2013 IEEE,
    IEEE, pp. 1--4, 2013.

  171. Ald aluminum oxide as protective coating against oxidation of LPCVD SiC microhotplates
    Morana, B; Fiorentino, G; Pandraud, G; Creemer, JF; Sarro, PM;
    In Micro Electro Mechanical Systems (MEMS), 2013 IEEE 26th International Conference on,
    IEEE, pp. 484--487, 2013.

  172. Heat flux sensor for power loss measurements of switching devices
    Iero, Demetrio; Corte, Francesco G Della; Fiorentino, Giuseppe; Sarro, Pasqualina M; Morana, B;
    In Thermal Investigations of ICs and Systems (THERMINIC), 2013 19th International Workshop on,
    IEEE, pp. 327--330, 2013.

  173. Carbon Nanotube based heat-sink for solid state lighting
    F. Santagata; G. Almanno; S. Vollebregt; C Silvestri; GuoQi Zhang; P.M. Sarro;
    In 8th IEEE Int. Conf. Nano/Micro Engineered and Molecular Systems (NEMS),
    pp. 1214-1217, Apr 2013. DOI 10.1109/NEMS.2013.6559937.

  174. Reflectance-based two-dimensional TiO2 photonic crystal liquid sensors
    Yujian Huang; G. Pandraud; P.M. Sarro;
    Optics Letters,
    Volume 37, Issue 15, pp. 3162-3164, Aug. 2012. DOI 10.1364/OL.37.003162.

  175. The atomic layer deposition array defined by etch-back technique: A new method to fabricate TiO2 nanopillars, nanotubes and nanochannel arrays
    Yujian Huang; G. Pandraud; P.M. Sarro;
    Nanotechnology,
    Volume 23, pp. 1-8, Nov. 2012. DOI 10.1088/0957-4484/23/48/485306.

  176. Hybrid silicon-PDMS optofluidic ARROW waveguide
    G. Testa; Yujian Huang; L. Zeni; P.M. Sarro;
    IEEE Photonics Technology Letters,
    Volume 24, Issue 15, pp. 1307-1309, Aug. 2012. DOI 10.1109/LPT.2012.2202645.

  177. 6 DOF force and torque sensor for micro-manipulation applications
    P. Estevez; J.M. Bank; M. Porta; J. Wei; P.M. Sarro; M. Tichem; U. Staufer;
    Sensors and Actuators A,
    Volume 186, pp. 86-93, Oct. 2012. DOI 10.1016/j.sna.2012.02.037.

  178. Suspended submicron silicon-beam for high sensitivity piezoresistive force sensing cantilevers
    J. Wei; S. Magnani; P.M. Sarro;
    Sensors and Actuators A,
    Volume 186, pp. 80-85, Oct. 2012. DOI 10.1016/j.sna.2012.02.021.

  179. A molybdenum MEMS microhotplate for high-temperature operation
    L. Mele; F. Santagata; E. Iervolino; M. Mihailovic; T. Rossi; A.T. Tran; H. Schellevis; J.F. Creemer; P.M. Sarro;
    Sensors and Actuators A,
    2012. DOI 10.1016/j.sna.2011.11.023.

  180. A buried vertical filter for micro and nanoparticle filtration
    S.J. Li; C. Shen; P.M. Sarro;
    Sensors and Actuators A,
    Volume 186, pp. 203-209., Oct. 2012. DOI 10.1016/j.sna.2012.04.027.

  181. Linear and rotational thermal micro-stepper motors
    A. Khiat; J.W. Spronck; J. van Schieveen; S. Milosavljevic; J. Wei; P. Estevez; P.M. Sarro; U. Staufer;
    Microelectronic Engineering,
    Volume 98, pp. 497-501, Oct. 2012. DOI 10.1016/j.mee.2012.07.086.

  182. Tube-shaped Pirani gauge for in situ hermeticity monitoring of SiN thin-film encapsulation
    F. Santagata; J.F. Creemer; E. Iervolino; P.M. Sarro;
    Journal of Micromechanics and Microengineering,
    Volume 22, Issue 10, Sep. 2012. DOI 10.1088/0960-1317/22/10/105025.

  183. Sensing performance of plasma-enhanced chemical vapor deposition SiC-SiO2-SiC horizontal slot waveguides
    G. Pandraud; E. Margallo-Balb�s; P.M. Sarro;
    Journal of Nanophotonics,
    Volume 6, pp. 1-7, Nov. 2012. DOI 10.1117/1.JNP.6.063530.

  184. Microcantilevers encapsulated in fluid wells for sensing in liquids
    W.J. Venstra; W.H. Wien; P.M. Sarro; J. van Eijk;
    Microelectronic Engineering,
    Volume 97, pp. 247-250, Sep. 2012. DOI 10.1016/j.mee.2012.03.030.

  185. Mechanical design and characterization for MEMS thin-film packaging
    F. Santagata; J.J.M. Zaal; V.G. Huerta; L. Mele; J.F. Creemer; P.M. Sarro;
    Journal of Microelectromechanical Systems,
    Volume 21, Issue 1, pp. 100-109, Feb. 2012. DOI 10.1109/JMEMS.2011.2170817.

  186. Micromachined nanofiltration modules for lab-on-a-chip applications
    C. Shen; V.R.S.S. Mokkapati; H.T.M. Pham; P.M. Sarro;
    Journal of Micromechanics and Microengineering,
    Volume 22, Issue 2, pp. 1-10., Jan. 2012. DOI 10.1088/0960-1317/22/2/025003.

  187. Micro-fabricated channel with ultra-thin yet ultra-strong windows enables electron microscopy under 4-bar pressure
    T. Alan; T. Yokosawa; J. Gaspar; G. Pandraud; O. Paul; F. Creemer; P.M. Sarro; H.W. Zandbergen;
    Applied Physics Letters,
    Volume 100, pp. 1-4, 2012. DOI 10.1063/1.3688490.

  188. High accuracy dual side overlay with wet anisotropic etching for HAR MEMS
    H.W. van Zeijl; K. Best; P.M. Sarro;
    In Technical Proceedings of the 2012 NSTI Nanotechnology Conference and Expo (NSTI-Nanotech 2012),
    pp. 180-183, 2012. ISBN 978-1-4665-6275-2.

  189. Stiction-driven sealing of surface micromachined channels
    B. Morana; G. Pandraud; F. Santagata; J.F. Creemer; P.M. Sarro;
    In 25th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2012),
    Paris, France, IEEE, pp. 329-332, Jan. 2012. ISBN 978-978-1-4673-0325-5; DOI 10.1109/MEMSYS.2012.6170202.

  190. Ultra-flexible devices for 360 _m diameter guidewires
    B. Mimoun; V. Henneken; P.M. Sarro; R. Dekker;
    In 25th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2012),
    Paris, France, IEEE, pp. 472-475, Jan. 2012. ISBN: 978-978-1-4673-0325-5, DOI 10.1109/MEMSYS.2012.6170227.

  191. Silicon nanowire FET arrays for real time detection of chemical activation of cells
    T.S.Y. Moh; S.K. Srivastava; S. Milosavljevic; M. Roelse; G. Pandraud; H.W. Zandbergen; L.C.P.M de Smet; C.J.M van Rijn; E.J.R. Sudh�lter; M.A. Jongsma; P.M. Sarro;
    In 25th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2012),
    Paris, France, IEEE, pp. 1344-1347, Jan. 2012. ISBN 978-978-1-4673-0325-5; DOI 10.1109/MEMSYS.2012.6170424.

  192. A comparison between PECVD and ALD for the fabrication of slot-waveguide-based sensors
    G. Pandraud; A. Purniawan; E. Margallo-Balb�s; P.M. Sarro;
    In Proc. SPIE: Nanophotonics IV,
    Brussels, Belgium, Apr. 2012. DOI 10.1117/12.922400.

  193. Analyzing protein denaturation using fast differential scanning calorimetry
    R. Splinter; A.W. van Herwaarden; E. Iervolino; G. Vanden Poel; D. Istrate; P.M. Sarro;
    In R. Walczak; J. Dziuban (Ed.), Proc. Eurosensors XXVI,
    Krakow, Poland, Procedia Engineering, pp. 140-143, Sep 2012. DOI 10.1016/j.proeng.2012.09.104.

  194. Enhancement of AlN slender piezoelectric cantilevers actuation by PECVD silicon nitride coating
    A.T. Tran; G. Pandraud; H. Schellevis; P.M. Sarro;
    In R. Walczak; J. Dziuban (Ed.), Proc. Eurosensors XXVI,
    Krakow, Poland, Procedia Engineering, pp. 104-107, Sep 2012. DOI 10.1016/j.proeng.2012.09.095.

  195. A novel approach for piezoresistivity characterization of silicon nanowires
    M. Nie; F. Santagata; T. Moh; Q.-A. Huang; P.M. Sarro;
    In Proc. 11th IEEE Sensors Conference,
    Taipei, Taiwan, pp. 1747-1750, Oct 2012.

  196. Encapsulated aluminum nitride SAW devices for liquid sensing applications
    A.T. Tran; G. Pandraud; T.S.Y. Moh; H. Schellevis; A. Akhnoukh; A. Purniawan; P.M. Sarro;
    In Proc of the 11th IEEE Sensors Conf,
    Taipei, Taiwan, pp. 604-607, Oct. 2012.

  197. Silicon-polymer electro-thermal bimorph actuators with SiC bottom-layer for large out-of-plane motion and improved power efficiency
    M. Aarts; J. Wei; P.M. Sarro;
    In 7th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS 2012),
    Kyoto, Japan, pp. 253-256, Mar. 2012. ISBN: 978-1-4673-1124-3; DOI 10.1109/NEMS.2012.6196768.

  198. Multilayer conformal coating of highly dense Multi-Walled Carbon Nanotubes bundles
    G. Fiorentino; S. Vollebregt; R. Ishihara; P.M. Sarro;
    In 2012 12th IEEE Conference on Nanotechnology (IEEE-NANO),
    Birmingham, UK, Aug. 2012. ISBN 978-1-4673-2198-3; DOI 10.1109/NANO.2012.6322054.

  199. Optofluidics: waveguides and devices
    G. Testa; Yujian Huang; L. Zeni; P.M. Sarro; R. Bernini;
    In Proc. SPIE: Integrated Optics: Devices, Materials, and Technologies XVI,
    Feb 2012. DOI 10.1117/12.908683.

  200. Single-mask fabrication of temperature triggered MEMS switch for cooling control in SSL system
    J. Wei; H. Ye; H.W. van Zeijl; P.M Sarro; GuoQi Zhang;
    In R. Walczak; J. Dziuban (Ed.), Proc. Eurosensors XXVI,
    Krakow, Poland, Procedia Engineering, pp. 849-852, Sep 2012. DOI 10.1016/j.proeng.2012.09.280.

  201. Fully back-end TSV process by Cu electro-less plating for 3D smart sensor systems
    F. Santagata; G. Fiorentino; M. Nie; C. Farriciello; R. Poelma; GuoQi Zhang; P.M. Sarro;
    In Proc. 11th IEEE Sensors Conference,
    Taipei, Taiwan, pp. 668-671, Oct 2012.

  202. Monitoring of meniscus motion at nozzle orifice with capacitive sensor for inkjet applications
    J. Wei; C. Yue; GuoQi Zhang; J.F. Dijksman; P.M. Sarro;
    In Proc. 11th IEEE Sensors Conference,
    Taipei, Taiwan, pp. 2172-2175, Oct 2012.

  203. Temperature calibration and electrical characterization of the differential scanning calorimeter chip UFS1 for the Mettler-Toledo Flash DSC 1
    E. Iervolino; A.W. van Herwaarden; F.G. van Herwaarden; E. van de Kerkhof; P.P.W. van Grinsven; A.C.H.I. Leenaers; V.B.F. Mathot; P.M. Sarro;
    Thermochimica Acta,
    Volume 522, Issue 1-2, pp. 53-59, Aug. 2011. DOI 10.1016/j.tca.2011.01.023.

  204. MEMS silicon-based micro-evaporator
    M. Mihailovic; C.M. Rops; J. Hao; L. Mele; J.F. Creemer; P.M. Sarro;
    Journal of Micromechanics and Microengineering,
    Volume 21, Issue 7, pp. 1-9, 2011. DOI 10.1088/0960-1317/21/7/075007.

  205. An analytical model and verification for MEMS Pirani gauges
    F. Santagata; E. Iervolino; L. Mele; A.W. van Herwaarden; J.F. Creemer; P.M. Sarro;
    Journal of Micromechanics and Microengineering,
    Volume 21, Issue 11, pp. 1-7, 2011. DOI 10.1088/0960-1317/21/11/115007.

  206. A surface micromachined thermopile detector array with an interference-based absorber
    H. Wu; A. Emadi; P.M. Sarro; G. de Graaf; R.F. Wolffenbuttel;
    Journal of Micromechanics and Microengineering,
    Volume 21, Issue 7, pp. 1-8, Jun. 2011. DOI 10.1088/0960-1317/21/7/074009.

  207. Mixed motion in deterministic ratchets due to anisotropic permeability
    T. Kulrattanarak; R.G.M. van der Sman; Y.S. Lubbersen; C.G.P.H. Schro�n; H.T.M. Pham; P.M. Sarro; R.M. Boom;
    Journal of Colloid and Interface Science,
    Volume 354, Issue 1, pp. 7-14., Feb. 2011. DOI 10.1016/j.jcis.2010.10.02.

  208. MEMS for thermogravimetry: Fully integrated device for inspection of nanomasses
    E. Iervolino; A.W. van Herwaarden; W. van der Vlist; P.M. Sarro;
    IEEE/ASME Journal of Microelectromechanical Systems,
    Volume 20, Issue 6, pp. 1277-1286, Dec. 2011. DOI 10.1109/JMEMS.2011.2167672.

  209. Enhancing the wettability of high aspect-ratio through-silicon vias lined with LPCVD silicon nitride or PE-ALD titanium nitride for void-free bottom-up copper electroplating
    M. Saadaoui; H. van Zeijl; W.H.A. Wien; H.T.M. Pham; C. Kwakernaak; H.C.M. Knoops; W.M.M. Erwin Kessels; R.M.C.M. van de Sanden; F.C. Voogt; F. Roozeboom; P.M. Sarro;
    IEEE Transactions on Components, Packaging and Manufacturing Technology,
    Volume 1, Issue 11, pp. 1728-1738, 2011. DOI 10.1109/TCPMT.2011.2167969.

  210. A tube-shaped buried Pirani gauge for low detection limit with small footprint
    F. Santagata; J.F. Creemer; E. Iervolino; L. Mele; A.W. van Herwaarden; P.M. Sarro;
    IEEE Journal of Microelectromechanical Systems,
    Volume 20, Issue 3, pp. 676-684, Jun. 2011. DOI 10.1109/JMEMS.2011.2127457.

  211. Low temperature encapsulation of nanochannels with water inside
    C. Shen; V.R.S.S. Mokkapati; F. Santagata; A. Bossche; P.M. Sarro;
    In 16th International Solid-State Sensors, Actuators and Microsystems Conference (TRANSDUCERS 2011),
    Beijing, China, pp. 854-857, Jun. 2011. ISBN 978-1-4577-0157-3; DOI 10.1109/TRANSDUCERS.2011.5969464.

  212. Sputtered molybdenum as conductive material for high-temperature microhotplates
    L. Mele; F. Santagata; E. Iervolino; M. Mihailovic; T. Rossi; A.T. Tran; H. Schellevis; J.F. Creemer; P.M. Sarro;
    In 16th International Solid-State Sensors, Actuators and Microsystems Conference (TRANSDUCERS 2011),
    Beijing, China, pp. 2690-2693, Jun. 2011. ISBN 978-1-4577-0157-3; DOI 10.1109/TRANSDUCERS.2011.5969500.

  213. Layer-by-layer deposition of colloidal semiconductor nanocrystals for integration of infrared photon-detectors on 3D topography
    J. Wei; Y. Gao; A.J. Houtepen; G. Pandraud; P.M. Sarro;
    In 16th International Solid-State Sensors, Actuators and Microsystems Conference (TRANSDUCERS 2011),
    Beijing, China, pp. 1749-1752, Jun. 2011. ISBN 978-1-4577-0157-3; DOI 10.1109/TRANSDUCERS.2011.5969819.

  214. MEMS silicon-based resistojet micro-thruster for attitude control of nano-satellites
    M. Mihailovic; T.V. Mathew; J.F. Creemer; B.T.C. Zandbergen; P.M. Sarro;
    In of 16th International Solid-State Sensors, Actuators and Microsystems Conference (TRANSDUCERS 2011),
    Beijing, China, pp. 262-265, Jun. 2011. ISBN 978-1-4577-0157-3; DOI 10.1109/TRANSDUCERS.2011.5969432.

  215. Self-cleaning mass calibration of a thermogravimetric device using a thin-film molybdenum
    E. Iervolino; L. Mele; F. Santagata; A.W. van Herwaarden; W. van der Vlist; J.F. Creemer; P.M. Sarro;
    In 16th International Solid-State Sensors, Actuators and Microsystems Conference (TRANSDUCERS 2011),
    Beijing, China, pp. 1038-1041, Jun. 2011. ISBN 978-1-4577-0157-3; DOI 10.1109/TRANSDUCERS.2011.5969167.

  216. IC compatible top down process for silicon nanowire FET arrays with three 100 surfaces for (BIO) chemical sensing
    T.S.Y. Moh; Y. Maruyama; C. Shen; G. Pandraud; L.C.P.M. de Smet; H.D. Tong; C. van Rijn; E.J.R. Sudholter; P.M. Sarro;
    In 16th International Solid-State Sensors, Actuators and Microsystems Conference (TRANSDUCERS 2011),
    Beijing, China, pp. 1590-1593, Jun. 2011. ISBN 978-1-4577-0157-3; DOI 10.1109/TRANSDUCERS.2011.5969796.

  217. Process for low temperature deposition of strain gauge materials based on chromium nitride thin films
    H.A. Mol; H. Schellevis; P.M. Sarro; Y. Hou;
    In Proc. IEEE SENSORS 2011 Conference,
    Limerick, Ireland, pp. 226-229, Oct. 2011. ISBN 978-1-4244-9288-6; DOI 10.1109/ICSENS.2011.6127044.

  218. Developer etched single and arrays of three 100 planes silicon nanowires (SiNWs) FET
    T.S.Y. Moh; Y. Maruyama; G. Pandraud; L.C.P.M. de Smet; C. van Rijn; E.J.R. Sudholter; P.M. Sarro;
    In Proc. ICT.OPEN: Micro technology and micro devices (SAFE 2011),
    Veldhoven, The Netherlands, Nov. 2011.

  219. Fabrication of AlN slender piezoelectric cantilevers for high-speed MEMS actuations
    A.T. Tran; G. Pandraud; H. Schellevis; T. Alan; V. Aravindh; O. Wunnicke; P.M. Sarro;
    In C. Tsamis; G. Kaltas (Ed.), Proc. Eurosensors XXV,
    Athens, Greece, Procedia Engineering, pp. 673-676, Sep. 2011. DOI 10.1016/j.proeng.2011.12.166.

  220. 6 DOF force and torque sensor for micro-manipulation applications
    P. Estevez; J.M. Bank; M. Porta; J. Wei; P.M. Sarro; M. Tichem; U. Staufer;
    In C. Tsamis; G. Kaltas (Ed.), Proc. Eurosensors XXV,
    Athens, Greece, Procedia Engineering, pp. 39-42, Sep. 2011. DOI 10.1016/j.proeng.2011.12.010.

  221. Electro-thermal analysis of MEMS microhotplates for the optimization of temperature uniformity
    L. Mele; T. Rossi; M. Riccio; E. Iervolino; F. Santagata; A. Irace; G. Breglio; J.F. Creemer; P.M. Sarro;
    In C. Tsamis; G. Kaltas (Ed.), Proc. Eurosensors XXV,
    Athens, Greece, Procedia Engineering, pp. 387-390, Sep. 2011. DOI 10.1016/j.proeng.2011.12.096.

  222. Suspended submicron silicon-beam for high sensitivity piezoresistive sensing
    J. Wei; S. Magnani; P.M. Sarro;
    In C. Tsamis; G. Kaltas (Ed.), Proc. Eurosensors XXV,
    Athens, Greece, Procedia Engineering, pp. 1437-1440, Sep. 2011. DOI 10.1016/j.proeng.2011.12.355.

  223. A buried vertical filter for micro and nanoparticle filtration
    S.J. Li; C. Shen; P.M. Sarro;
    In C. Tsamis; G. Kaltas (Ed.), Proc. Eurosensors XXV,
    Athens, Greece, Procedia Engineering, pp. 1193-1196, Sep. 2011. DOI 10.1016/j.proeng.2011.12.294.

  224. A silicon-based MEMS resistojet for propelling cubesats
    T.V. Mathew; B.T.C. Zandbergen; M. Mihailovic; J.F. Creemer; P.M. Sarro;
    In Proc. 62nd International Astronautical Congress,
    Cape Town, South Africa, pp. 1-8, Oct. 2011.

  225. An all-in-one nanoreactor for high-resolution microscopy on nanomaterials at high pressures
    J.F. Creemer; F. Santagata; B. Morana; L. Mele; T. Alan; E. Iervolino; G. Pandraud; P.M. Sarro;
    In Proc. 24th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2011),
    Cancun, Mexico, IEEE, pp. 1103-1106, Jan. 2011. ISBN 978-1-4244-9633-4; DOI 10.1109/MEMSYS.2011.5734622.

  226. In situ HRTEM of a catalyst using a nanoreactor at 1 bar
    S.B. Vendelbo; J.F. Creemer; S. Helveg; B. Morana; L. Mele; A.M. Molenbroek; P.M. Sarro; H.W. Zandbergen; P.J. Kooyman;
    In Netherlands Catalysis and Chemistry Conference (NCCC-XII),
    Noordwijk, pp. 332, Feb. 2011.

  227. Conventional micro-fabrication process for silicon nanowires FET with three 100 surfaces
    T.S.Y. Moh; G. Pandraud; L.C.P.M. de Smet; C. van Rijn; E.J.R. Sudholter; P.M. Sarro;
    In International Conference on Materials for Advanced Technologies (ICMAT 2011),
    Suntec City, Singapore, Jun. 2011.

  228. Biosensing
    E.J.R. Sudholter; G.Z. Garyfallou; D. Ullien; L.C.P.M. Smet; S. Srivastava; M.A. Jongsma; M. Mescher; J.H. Klootwijk; T.S.Y. Moh; P.M. Sarro; C. Rijn;
    In Book of Abstracts, 4th IRUN Symposium on NanoTechnology,
    Nijmegen, The Netherlands, pp. 32-33, Oct. 2011.

  229. Linear and rotation thermal micro-stepper
    A. Khiat; J. Spronck; J. van Schieveen; S. Milosavljevic; J. Wei; P. Estevez; P.M. Sarro; U. Staufer;
    In 37th International Conference on Micro and Nano Engineering (MNE 2011,
    Berlin, Germany, pp. 1, Sep. 2011.
    document

  230. A silicon carbide MEMS microhotplate for nanomaterial characterization in TEM
    B. Morana; F. Santagata; L. Mele; M. Mihailovic; G. Pandraud; J.F. Creemer; P.M. Sarro;
    In 24th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2011),
    Cancun, Mexico, IEEE, pp. 380-383, Jan. 2011. ISBN 978-1-4244-9633-4; DOI 10.1109/MEMSYS.2011.5734441.

  231. Microcantilevers encapsulated in fluid wells for sensing in liquids
    W.J. Venstra; W.H. Wien; P.M. Sarro; J. van Eijk;
    In 37th International Conference on Micro and Nano Engineering (MNE 2011),
    Berlin, Germany, pp. 1, Sep. 2011.
    document

  232. Reflectance-based TiO2 photonic crystal sensors
    Yujian Huang; G. Pandraud; P.M. Sarro;
    In 16th International Solid-State Sensors, Actuators and Microsystems Conference (TRANSDUCERS 2011),
    Beijing, China, pp. 2682-2685, Jun. 2011. ISBN 978-1-4577-0157-3; DOI 10.1109/TRANSDUCERS.2011.5969771.

  233. PECVD SiC photonic crystal sensor
    G. Pandraud; Yujian Huang; P.M. Sarro; F. Bernal Arango;
    In Proc. IEEE SENSORS 2011 Conference,
    Limerick, Ireland, pp. 367-370, Oct. 2011. ISBN 978-1-4244-9288-6; DOI 10.1109/ICSENS.2011.6127130.

  234. Co-design of wafer level thin film package assembly
    J.J.M. Zaal; F. Santagata; W.D. van Driel; GuoQi Zhang; J.F. Creemer; P.M. Sarro;
    In 12th Internat. Conf. on Thermal, Mechanical and Multi-Physics Simulation and Experiments Microelectronics and Microsystems (EuroSimE 2011),
    Linz, Austria, pp. 1-6, Apr. 2011. ISBN 978-1-4577-0106-1.
    document

  235. Reflectance-based photonic crystal liquid sensors made of ALD TiO2
    Yujian Huang; G. Pandraud; P.M Sarro;
    In C. Tsamis; G. Kaltas (Ed.), Proc. Eurosensors XXV,
    Athens, Greece, Procedia Engineering, pp. 1389-1392, Sep. 2011. DOI 10.1016/j.proeng.2011.12.343.

  236. Design, fabrication and characterization of a femto-farad capacitive sensor for pico-liter liquid monitoring
    J. Wei; C. Yue; M. van der Velden; Z.L. Chen; Z.W. Liu; K.A.A. Makinwa; P.M. Sarro;
    Sensors and Actuators A,
    Volume 162, Issue 2, pp. 406-417, 2010.

  237. A silicon MEMS structure for characterization of femto-farad-level capacitive sensors with lock-in architecture
    J. Wei; C. Yue; Z.L. Chen; Z.W. Liu; P.M. Sarro;
    Journal of Micromechanics and Microengineering,
    Volume 20, Issue 6, 2010.

  238. Wafer-level assembly and sealing of a MEMS nanoreactor for in situ microscopy
    L. Mele; F. Santagata; G. Pandraud; B. Morana; F. D. Tichelaar; J. F. Creemer; P. M. Sarro;
    J. Micromech. Microeng.,
    Volume 20, 2010.

  239. LPCVD amorphous SiCx for freestanding electron transparent windows
    B. Morana; J.F. Creemer; F. Santagata; C.C. Fan; H.T.M. Pham; G. Pandraud; F.D. Tichelaar; P.M. Sarro;
    In Y. Suzuki; Man Wong (Ed.), Proceedings of IEEE MEMS 2010 Conference,
    Wanchai, Hong Kong, IEEE, pp. 572-575), 2010.

  240. Design and Development of an Ultra Compact Silicon Phase-Change Heat Exchanger
    Rops; C M; M. Mihailovic; P.M. Sarro;
    In Proceedings of the 2nd European Conference Microfluidics,
    Toulouse, France, Dec. 2010.

  241. MEMS Silicon-Based Micro-Evaporator with Diamond-Shaped Fins
    M. Mihailovic; C. Rops; J.F. Creemer; P.M. Sarro;
    In Proceedings of EUROSENSORS XXIV,
    Linz, Austria, Sep. 2010.

  242. Electrical characterization of TiSi/TiN layer stack in temperature range from 0 � 500 �C
    M. Mihailovic; J.F. Creemer; P.M. Sarro;
    In Proceedings of 13th Annual Workshop on Semiconductors Advances for Future Electronics and Sensors (SAFE),
    Veldhoven, The Netherlands, pp. 114-117, 2010.

  243. A piezoresistive sensor for pressure monitoring at inkjet nozzle
    J. Wei; P.M. Sarro; T. Chu Duc;
    In Proc. IEEE Sensors,
    pp. 2093-2096, 2010.

  244. A position and force-distribution sensor-array for monitoring the contact condition of objects in microhandling
    J. Wei; M. M. Porta. Tichem; U. Staufer; P.M. Sarro;
    In Proc. the 23th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2010),
    pp. 623-626, 2010.

  245. Modulation speed improvement in a FabryPerot thermo-optical modulator through a driving signal optimization technique
    F.G. della Corte; M. Merenda; G. Cocorullo; M. Iodice; I. Rendina; P.M. Sarro;
    Optical engineering,
    Volume 48, Issue 7, 2009.

  246. Pattern transfer on a vertical cavity sidewall using SU8
    T. Verhaar; J. Wei; P.M. Sarro;
    Journal of micromechanics and microengineering,
    Volume 19, 2009.

  247. Photolithography on bulk micromachined substrates. Journal of micromechanics and microengineering
    W.J. Venstra; J.W. Spronck; P.M. Sarro; J. van Eijk;
    Journal of micromechanics and microengineering,
    Volume 19, pp. 1-6, 2009.

  248. A 2_2 Optofluidic Multimode Interference Coupler
    R. Bernini; G. Testa; L. Zeni; P.M. Sarro;
    IEEE journal of selected topics quantum electronics,
    Volume 15, Issue 5, pp. 1478-1484, 2009. ISSN 1077-260X.

  249. Alignment and Overlay Characterization for 3D Integration and Advanced Packaging
    H.W. van Zeijl; P.M. Sarro;
    In Proc. of 11th Electronic packaging and Technology conference 2009 (EPTC 2009),
    Singapore, IEEE, 2009. ISBN 978-1-4244-5100-5.

  250. Paalvast, SL, Sarro, PM & Munnig Schmidt, RH
    S.L. Paalvast; P.M. Sarro; R.H. Munnig Schmidt;
    In Proceedings of the EuroSimE 2009,
    Montigny le Bretonneux, pp. 318-321, 2009.

  251. Fast response thermal linear motor with reduced power consumption
    S.L. Paalvast; H.T.M. Pham; P.M. Sarro; R.H. Munnig Schmidt;
    In Proceedings of the Eurosensors XXIII Conference, august 2009,
    Lausanne, pp. 690-693, 2009.

  252. Electro less deposition and structuring of silver electrodes inside closed micro fluidic channels
    F.C.A. Heuck; P.M. Sarro; J.H.C.M. Slabbekoorn; T. Akiyama; U. Staufer;
    In Proceedings of the Euspen 9th International Conference,
    Bedford: Euspen, pp. 158-161, 2009.

  253. Characterization of ultrathin membranes to enable TEM observation of gas reaction at high pressures
    Alan; T; Gaspar; J; Paul; O; H.W. Zandbergen; J.F. Creemer; P.M. Sarro;
    In Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition,
    Lake Buena Vista, Florida, USA: American Society of Mechanical Engineers (ASME), pp. 1-5, 2009.

  254. Wafer Level Encapsulation Techniques for a MEMS Microreactor with integrated Heat Exchanger
    F. Santagata; L. Mele; M. Mihailovic; B. Morana; J.F. Creemer; P.M. Sarro;
    In Proceedings of IEEE Sensors 2009 Conference,
    Christchurch, New Zealand, pp. 799-802, 2009.
    document

  255. Thermal analysis of peptides with a calorimeterchip
    E. Iervolino; I.M.O. Finoulst; A.W. van Herwaarden; W.H.A. Wien; P.D.E. Verhaert; P.M. Sarro;
    In Proceedings of 15th international conference on solid-state sensors, actuators & microsystems,
    2009.
    document

  256. Silicon-based MEMS micro-evaporator
    J. Hao; M. Mihailovic; C.M. Rops; J.F. Creemer; P.M. Sarro;
    In Proceedings of 20th Micromechanics Europe Workshop (MME),
    Toulouse, France, pp. 1-4, 2009.
    document

  257. Sheet resistance of As-doped monocrystalline silicon in temperature range up to 1100 K
    M. Mihailovic; J.F. Creemer; P.M. Sarro;
    In Proceedings of 12th Annual Workshop on Semiconductors Advances for Future Electronics and Sensors (SAFE),
    Veldhoven, The Netherlands, pp. 36-39, 2009.
    document

  258. Mems nanoreactor for atomic-resolution microscopy of nanomaterials in their working state
    J.F. Creemer; S. Helveg; G.H. Hoveling; S. Ullman; P.J. Kooyman; A.M. Molenbroek; H.W. Zandbergen; P.M. Sarro;
    In Proceedings 22nd IEEE International Conference on Micro Electro Mechanical Systems 2009,
    Sorrento, IEEE, pp. 76-79, 2009.
    document

  259. Low-temperature wafer-level packaging of a MEMS microreactor with a lateral feedthrough by local PECVD TEOS deposition
    L. Mele; B. Morana; C.R. de Boer; J.F. Creemer; P.M. Sarro;
    In Proceeding title: Proceedings of the Eurosensors XXIII Conference,
    Lausanne, Switzerland, pp. 1531-1534, 2009.
    document

  260. Deterministic Ratchets for Particle Separation Fabricated With Si MEMS Technology
    H.T.M. Pham; T. Kulrattanarak; R.G.M. van der Sman; C. Schroen; R.M. Boom; P.M. Sarro;
    In Proc. of the Eurosensors XXIII conference,
    Lausanne, Switzerland, pp. 345-348, 2009.
    document

  261. Characterization of AlN thin films sputtered on Al/Ti electrodes for piezoelectric devices
    A.T. Tran; H. Schellevis; C. Shen; H.T.M. Pham; P.M. Sarro;
    In Proc. of SAFE 2009,
    Veldhoven, The Netherlands, STW, pp. 121-124, 2009.
    document

  262. Sensing Microgripper with PID Control
    P. Phan Huu; V.Q. Nguyen; T. Chu Duc; P.M. Sarro;
    In Ngo Nguyen; N.K. Cheung (Ed.), Proc. of 2008 International Conference on Advanced Technologies for Communications,
    Hanoi, Vietnam, pp. 319-322), 2009.

  263. Thermal characterization of microliter amounts of liquids by a micromachined calorimetric transducer
    S.L. Paalvast; P.M. Sarro; R.H. Munnig Schmidt;
    In Proc. IEEE MEMS 2009,
    Sorrento, Italy: IEEE, pp. 535-538, 2009.

  264. Vertical Contact Position Detection and Grasping Force Monitoring for Micro-Gripper Applications
    M. Porta; J. Wei; M. Tichem; P.M. Sarro; U. Staufer;
    In Proc. IEEE Sensors 2009 Conference,
    Christchurch, New Zealand, pp. 967-970, 2009.

  265. Characterization of Femto-Farad-Level Capacitive MEMS Sensors using Lock-in Architecture
    C. Yue; J. Wei; Z.L. Chen; Z.W. Liu; P.M. Sarro;
    In P. Pons (Ed.), Proceedings of 20th Micromechanics Europe Workshop (MME),
    Toulouse, France, LAAS-CNRS, pp. 1-4, 2009.

  266. Oxidized ALD-deposited titanium nitride films as a low-temperature alternative for enhancing the wettability of through-silicon vias
    M. Saadaoui; H.W. van Zeijl; H.T.M. Pham; H.C. Knoops; W.M.M. Kessels; M.C.M. van de Sanden; F. Roozeboom; Y. Lamy; K.B. Jinesh; W. Besling; P.M. Sarro;
    In MRS Proceedings Volume 1112, Materials and Technologies for 3-D Integration,
    Warrendale, PA, pp. 1-8, 2009.

  267. Implementation and Characterization of a femto-Farad Capacitive Sensor for pico-Liter Liquid Monitoring.
    J. Wei; C. Yue; Z.L. Chen; Z.W. Liu; K.A.A. Makinwa; P.M. Sarro;
    In J. Brugger; D. Briand (Ed.), Eurosensors XXIII,
    Lausanne, Switzerland, Elsevier, pp. 120-123), 2009.
    document

  268. Through Silicon Interconnect Using grayscale Lithography for MEMS Applications.
    H.W. van Zeijl; D. Liu; P.M. Sarro;
    In J. Brugger; D. Briand (Ed.), Eurosensors XXIII,
    Lausanne, Switzerland, Elsevier, pp. 1543-1546, 2009.
    document

  269. A Multifunctional Vertical Microsieve for Micro and Nano Particles Separation
    C. Shen; T.M.H. Pham; P.M. Sarro;
    In Micro Electro Mechanical Systems,
    Sorrento, Italy, pp. 383-386, 2009.

  270. A contact position detection and interaction force monitoring sensor for micro-assembly applications.
    J. Wei; M. Porta; M. Tichem; P.M. Sarro;
    In K Najafi & M Schmidt (Eds.), Proceedings of the 15th International Conference on Solid State Sensors, Actuators and Microsystems (Transducers 2009),
    Denver, USA, IEEE, pp. 2385-2388), 2009. ISBN 978-1-4244-4193-8.

  271. Alignment insensitive anisotropic etching of silicon cavities with smooth 49� sidewalls
    C. Shen; H.T.M. Pham; P.M. Sarro;
    In he 15th International Conference on Solid-State Sensors, Actuators and Microsystems, Transducers 2009,
    pp. 1071-1074, 2009.
    document

  272. Aluminum thermal motor for high bandwidth positioning stages
    S.L. Paalvast; H.T.M. Pham; P.M. Sarro; R.H. Munnig Schmidt;
    In 9th international conference of the european society for precision engineering and nanotechnology,
    San Sebastian, SP, pp. 54-58, 2009.

  273. Optical and surface properties of ALD TiO2 thin films and laminate layers for sensing applications
    Yujian Huang; P.M. Sarro;
    In Proceedings of 12th Annual Workshop on Semiconductors Advances for Future Electronics and Sensors (SAFE),
    Veldhoven, The Netherlands, pp. 24-27, 2009.
    document

  274. Dynamic Model for Design Optimization of a high Bandwidth Thermal Linear Motor.
    S.L. Paalvast; P.M. Sarro; R.H. Munnig Schmidt;
    In L.J. Ernst; GuoQi Zhang (Ed.), Proceedings of the EuroSimE 2009,
    Montigny le Bretonneux, IEEE, pp. 318-321, 2009. ISBN 978-1-4244-4159-4.

  275. Continuous deep reactive ion etching of tapered via holes for three-dimensional integration
    R. Li; .Y Lamy; W.F.A. Besling; F. Roozeboom; P.M. Sarro;
    J. Micromech. Microeng.,
    Volume 18, 2008.

  276. Thin-film encapsulation of a silicon field emission electron source
    F. Santagata; C.K. Yang; J.F. Creemer; P.M. Sarro;
    In s.n. (Ed.), Proceedings Eurosensors XXII,
    Dresden, Germany: Eurosensors XXII, pp. 625-628, 2008.
    document

  277. Monocrystalline silicon microhotplate heater
    M. Mihailovic; J.F. Creemer; P.M. Sarro;
    In Proceedings of EUROSENSORS XXII,
    Dresden, Germany, pp. 1611-1614, Sep. 2008.

  278. Electrical behaviour of mono-Si based microhotplate heater
    M. Mihailovic; J.F. Creemer; P.M. Sarro;
    In Proceedings of 11th Annual Workshop on Semiconductors Advances for Future Electronics and Sensors (SAFE),
    Veldhoven, The Netherlands, pp. 411-414, 2008.

  279. Analysis and characterization of an electrothermal silicon-polymer
    J. Wei; P.M. Sarro;
    In Proc. the 2008 annual workshop on semiconductor advances for future electronics and sensors (SAFE 2008),
    pp. 436-439, 2008.

  280. Temperature Calibration of Fast Scan Calorimeter Chips.
    E. Iervolino; A.W. van Herwaarden; P.M. Sarro;
    In Proceedings Eurosensors XXII,
    Dresden, Germany, Sep. 2008.

  281. A novel semi SOI fabrication process for integrated 3D micromachining
    J. Wei; T. Chu Duc; P.M. Sarro;
    In Proc. IEEE NEMS 2008,
    pp. 717-720, 2008.

  282. Design and characterization of a novel icp plasma tool for high speed and high accuracy drie processing
    N. Launay; H. W. van Zeijl; P. M. Sarro;
    In Proc. IEEE MEMS 2008,
    Tucson, Arizona, USA, pp. 311-314, Jan. 2008.

  283. Electrothermal microgripper with large jaws displacement and integrated force sensors
    T.Chu Duc; G.K.lau; J.F. Creemer; P.M. Sarro;
    In Proc. IEEE MEMS 2008,
    Tucson, Arizona, USA, pp. 519-522, Jan. 2008.

  284. An electro-thermal silicon-polymer micro-gripper for simultaneous in-plane and out-of-plane motions
    J. Wei; T. Chu Duc; P.M. Sarro;
    In Proc. EUROSENSORS XXII,
    pp. 1466-1469, 2008.

  285. 3D Microstructuring of silicon and SU8 polymer for microsystems applications
    P.M. Sarro; J. Wei; T. Chu Duc;
    In Proc. 19th Micromechanics Europe (MME 2008),
    pp. 237-241, 2008.

  286. Highly uniform coating of vertical sidewall for 3D pattern definition
    T. Verhaar; J. Wei; P.M. Sarro;
    In Proc. 19th Micromechanics Europe (MME 2008),
    pp. 141-145, 2008.

  287. Novel electrothermal bimorph actuator for large out-of-plane displacement and force
    J.Wei; T.Chu Duc; G.K.Lau; P.M. Sarro;
    In IEEE MEMS 2008,
    Tucson, Arizona, USA, pp. 46-49, Jan. 2008.

  288. A dual-side fabrication method for silicon plate springs with high out-of plane stiffness
    S.L.Paalvast; H.W. van Zeijl; J.Su; P.M. Sarro; J. van Eijk;
    J. Micromech. and Microeng.,
    Volume 17, Issue 7, pp. 197-203, 2007.

  289. An in-plane thermal unimorph using confined polymers
    G.K.Lau; T.Chu Duc; J.F.L Goosen; F. van Keulen; P.M. Sarro;
    J. Micromech. and Microeng.,
    Volume 17, Issue 7, pp. 174-183, 2007.

  290. Piezoresistive cantilever beam for force sensing in two dimensions
    T.Chu Duc; J.F. Creemer; P.M. Sarro;
    IEEE Sensors,
    Volume 7, pp. 96-104, 2007.

  291. 2-D MMI devices based on integrated hollow ARROW waveguides
    R.Bernini; E.De Nuccio; F.Brescia; A.Minardo; L.Zeni; P.M. Sarro;
    IEEE J.of Selected Topics Quantum Electronics,
    Volume 13, Issue 2, pp. 194-201, 2007.

  292. Powerful polymeric thermal micro-actuator with embedded silicon microstructure
    G.K. Lau; .F.L Goosen; F. van Keulen; T. Chu Duc; P.M. Sarro;
    Applied Physics Letters,
    Volume 90, Issue 21, 2007.

  293. Polymer constraint effect for electro-thermal bimorph microactuators
    T. Chu Duc; G.K. Lau; P.M. Sarro;
    Appl. Phys. Lett.,
    Volume 91, 2007.

  294. Fabrication of in situ ultrathin anodic aluminum oxide layers for nanostructuring on silicon substrate
    B. Yan; H.T.M. Pham; Y. Ma; Y. Zhuang; P.M. Sarro;
    Appl. Phys. Lett.,
    Volume 91, pp. 101902.1-3, 2007.

  295. In-situ isotropic and anisotropic DRIE sequence for massive parallel multistage Brownian ratchets
    H.T.M.Hoa; C.d.Boer; J.Wei; P.M. Sarro;
    In G. Delapierre; R. Puers (Ed.), Proc. Transducers 2007 Conference,
    Lyon, France, IEEE, pp. 497-500, Jun. 2007.

  296. Fabrication and characterization of high aspect ratio silicon plate springs with high out-of plane stiffness
    H.W. van Zeijl; S.L. Paalvast; J. Su; J. van Eijk; P.M. Sarro;
    In G. Delapierre; R. Puers (Ed.), Proc. Transducers 2007 Conference,
    Lyon, France, IEEE, pp. 1605-1608, Jun. 2007.

  297. Power efficient V-shape electro-thermal actuator using constrained SU8
    G.K.Lau; T.Chu Duc; J.F.L Goosen; P.M. Sarro; F. van Keulen;
    In G. Delapierre; R. Puers (Ed.), Proc. Transducers 2007 Conference,
    Lyon, France, IEEE, pp. 287-290, Jun. 2007.

  298. Fabrication of vertical electrodes on channel sidewall for picoliter liquid measurements
    Jia Wei; M. van der Velden; P.M. Sarro;
    In G. Delapierre; R. Puers (Ed.), Proc. Transducers 2007 Conference,
    Lyon, France, IEEE, pp. 1613-1616, Jun. 2007.

  299. Characterization of a Nozzle-Integrated Capacitive Sensor for Microfluidic Jet Systems
    M. van der Velden; J.W. Spronck; R.H. Munnig Schmidt; J. Wei; P.M. Sarro;
    In B.Mizaikoff; P.J. French (Ed.), Proc. IEEE Sensors 2007 Conf,
    Atlanta, Georgia, USA, IEEE, pp. 1241-1244, Oct. 2007.

  300. Integrated Silicon-polymer laterally stacked bender for sensing microgrippers
    T. Chu Duc; G.K.Lau; J.F.L Goosen; F. van Keulen; P.M. Sarro;
    In S.Lee; M. Esashi (Ed.), Proc. IEEE Sensors 2006 Conf,
    Daegu, Korea, IEEE, pp. 662-665, Oct. 2007.

  301. Local Sealing of High Aspect Ratio Vias for Single Step Bottom-up Copper Electroplating of Through Wafer Interconnects
    M. Saadaoui; W. Wien; H. V. Zeijl; H. Schellevis; M. Laros; P. M. Sarro;
    In B.Mizaikoff; P.J. French (Ed.), Proc. IEEE Sensors 2007 Conf,
    Atlanta, Georgia, USA, IEEE, pp. 974-977, Oct. 2007.

  302. Nano-hole arrays in thin Au/Pd film on glass for high speed molecular analysis
    O. Piciu; M van der .Krogt; M.Docter; P.M. Sarro; A.Bossche;
    In S.Lee; M. Esashi (Ed.), Proc. IEEE Sensors 2006 Conf,
    Daegu, Korea, IEEE, pp. 608-611, Oct. 2007.

  303. Electro-thermally actuated polymeric stack for linear in-plane actuation
    G.K. Lau; T .Chu Duc; J.F.L Goosen; F. van Keulen; P.M. Sarro;
    In S.Lee; M. Esashi (Ed.), Proc. IEEE Sensors 2006 Conf,
    Daegu, Korea, IEEE, pp. 538-541, Oct. 2007.

  304. 2D electro-thermal microgripper with large clamping and rotation motion at low driving voltage
    T.Chu Duc; J.Wei; G.K.Lau; P.M. Sarro;
    In Proc. 20th IEEE International Conference on MicroElectroMechganical Systems (IEEE MEMS 2007),
    Kobe, Japan, pp. 687-690, Jan. 2007.

  305. Simulation and measurement of a comb-structure silicon-polymer thermally actuated microgripper
    F. Krecinic; T.Chu Duc; G.K. Lau; P.M. Sarro;
    In Proc. 18th MicroMechanics Europe (MME 2006),
    Guimares, Portugal, Univ. Minho, pp. 215-218, Sept.16-18 2007.

  306. Integrated Silicon-polymer laterally stacked actuators for out-of-plane bending motion
    J.Wei; T.Chu Duc; P.M. Sarro;
    In Proc. 18th MicroMechanics Europe (MME 2006),
    Guimares, Portugal, Univ. Minho, pp. 187-190, Sept.16-18 2007.

  307. Straight sidewall controlling of high viscosity SU-8 photoresist patterning using UV lithography
    C. Olivadoti; H.T.M. Pham; P.M. Sarro;
    In Proc. 18th MicroMechanics Europe (MME 2006),
    Guimares, Portugal, Univ. Minho, Sept. 2007.

  308. Oxide to oxide wafer bonding for three dimensional (3D) IC integration technologies
    M. Cannavo; H.W. van Zeijl; G. Pandraud; J. V. Driel; T. Alan; P.M. Sarro;
    In Proc SAFE & Prorisc 2004,
    Veldhoven, The Netherlands, STW, pp. 509-512, Nov. 2007.

  309. Tuning of DRIE process for Capacitive Sensor in Inkjet Nozzle
    J.Wei; T. Chu Duc; M. van der Velden; P. M. Sarro;
    In Proc SAFE & Prorisc 2004,
    Veldhoven, The Netherlands, STW, pp. 625-628, Nov. 2007.

  310. Roughness treatment of silicon surface after Deep Reactive Ion Etching
    H.T.M. Pham; Charles R. de Boer; P.M. Sarro;
    In Proc SAFE & Prorisc 2004,
    Veldhoven, The Netherlands, pp. 535-538, Nov. 2007.

  311. A comparative study of the strength of Si, SiN and SiC used at nanoscales
    T. Alan; P.M. Sarro;
    In Proc SAFE & Prorisc 2004,
    Veldhoven, The Netherlands, STW, pp. 395-398, Nov. 2007.

  312. Improvement of wettability of silicon nitride in PECVD environment for copper electrodeposition in HAR vias
    M. Saadaoui; W. Wien; H. van Zeijl; A. van den Bogaard; P.M. Sarro;
    In Proc SAFE & Prorisc 2004,
    Veldhoven, The Netherlands, STW, pp. 543-546, Nov. 2007.

  313. Integrated silicon optical sensors based on hollow core waveguide
    R. Bernini; E. De Nuccio; A. Minardo; L. Zeni; P.M. Sarro;
    In A. Kubby; G.T. Reed (Ed.), Photonics West, Proc. SPIE: Silicon Photonics II,
    San Jose, California, USA, SPIE, Jan. 2007.

  314. Monocrystalline Si-based microhotplate heater
    M. Mihailovic; J.F. Creemer; P.M. Sarro;
    In Proc. SAFE/STW,
    Veldhoven, The Netherlands, pp. 608-611, Nov. 2007.

  315. Lateral nanoNewton force sensing piezocantilevers for microparticle handling
    T. Chu Duc; J.F. Creemer; P.M. Sarro;
    J. Micromech and Microeng.,
    Volume 16, Issue 6, pp. 102-106, 2006.

  316. Silicon Micromachining of High Aspect Ratio, High-Density Through-Wafer Electrical Interconnects for 3-D Multichip Packaging
    Zheyao Wang; Lianwei Wang; N. T. Nguyen; Wim A. H. Wien; Hugo Schellevis; Pasqualina M. Sarro; Joachim N. Burghartz;
    IEEE Tr. Advanced Packaging,
    Volume 29, Issue 3, Aug. 2006.

  317. In-package MEMS-based thermal actuators for micro-assembly
    V.A. Henneken; M. Tichem; P.M. Sarro;
    J. Micromech. Microeng.,
    Volume 16, pp. S107-S115, 2006.

  318. Development and characterization of an integrated silicon micro flow cytometer
    R.Bernini; E.De Nuccio; F.Brescia; A.Minardo; L.Zeni; P.M. Sarro; R.Palumbo; M.R.Scarfi;
    Analytical and Bioanalytical Chemistry,
    Volume 386, pp. 1267-1272, 2006.

  319. Piezoresistive cantilever for nano-Newton sensing in two dimensions
    T. Chu Duc; J.F. Creemer; P.M. Sarro;
    In Proc. 19th IEEE International Conference on MicroElectroMechganical Systems (IEEE MEMS 2006),
    Istanbul, Turkey, pp. 586-589, 2006.
    document

  320. Advanced silicon micromachining for 3D micro and nanostructuring
    P.M. Sarro; J.Wei;
    In Proc. IWOFM-IWONN Conference,
    Halong, Vietnam, Dec. 2006.
    document

  321. Versatile wire configuration for independent actuation of bending and torsion displacements of microcantilevers
    W.J. Venstra; M. van der Velden; J.W. Spronck; J. van Eijk; P.M. Sarro;
    In Proc. IEEE Sensors 2005,
    Irvine, California, USA, pp. 584-587, Oct. 2006.
    document

  322. MEMS Hotplates with TiN as a Heater Material
    J.F. Creemer; D. Briand; W. van der Vlist; C. de Boer; H.W. Zandbergen; P.M. Sarro;
    In Proc. IEEE Sensors 2005,
    Irvine, California, USA, pp. 330-333, Oct. 2006.

  323. ATTO-Liter Periodical Cavities for Optical BIO-Molecular Detection
    O. Piciu; M. van der Krogt; M. Docter; P.M. Sarro; A. Bossche;
    In Proc. IEEE Sensors 2005,
    Irvine, California, USA, pp. 452-456, Oct. 2006.

  324. Improved thermal U-beam actuators for micro-assembly
    V. Henneken; M. Tichem; P.M. Sarro;
    In P.Enoksson (Ed.), Proc. Eurosensors XX,
    Goteborg, Sweden, Sept. 2006.
    document

  325. Silicon bulk micromachining: from sub-mm to nm 3D structuring
    P.M. Sarro;
    In P.Enoksson (Ed.), Proc. Eurosensors XX,
    Goteborg, Sweden, Sept. 2006.
    document

  326. A novel dual-side fabrication method for silicon plate springs with high out-of plane stiffness
    H.W. van Zeijl; J. Su; S.L. Paalvast; P.M. Sarro; J. van Eijk;
    In H. Morgan (Ed.), Proc. 17th MicroMechanics Europe (MME 2006),
    Southampton, UK, pp. 209-212, Sept. 2006.
    document

  327. In-plane thermal unimorph using confined polymers
    G.K.Lau; T.Chu Duc; J.F.L Goosen; F. van Keulen; P.M. Sarro;
    In H. Morgan (Ed.), Proc. 17th MicroMechanics Europe (MME 2006),
    Southampton, UK, pp. 117-120, Sept. 2006.

  328. Study on 2-lever DRIE for 3D MEMS structures
    J.Wei; T.ChuDuc; P.M. Sarro;
    In Proc SAFE & Prorisc 2004,
    Veldhoven, pp. 494-497, Nov. 2006.
    document

  329. Copper electroplating for 3D interconnects
    M.Saadaoui; W.Wien; H.van Zeijl; P.M. Sarro;
    In Proc SAFE & Prorisc 2004,
    Veldhoven, pp. 523-526, Nov. 2006.
    document

  330. Silicon-polymer laterally stacked bimorph micro-gripper
    T. Chu Duc; G.K. Lau; J. Wei; P.M. Sarro;
    In H. Morgan (Ed.), Proc. 17th MicroMechanics Europe (MME 2006),
    Southampton, UK, pp. 197-200, Sept. 2006.

  331. Fabrication of porous anodic aluminum oxide templates and pattern transfer
    B.Yan; V.Vespini; H.T.M.Pham; H.Schellevis; P.M. Sarro;
    In Proc SAFE & Prorisc 2004,
    Veldhoven, pp. 498-501, Nov. 2006.
    document

  332. A novel dual-side fabrication method for silicon plate springs with high out-of plane stiffness
    J.Su; H.W.van Zeijl; S.L.Paalvast; P.M. Sarro; J.van Eijk;
    In Proc SAFE & Prorisc 2004,
    Veldhoven, pp. 394-397, Nov. 2006.
    document

  333. Integrated Silicon-Polymer Laterally Stacked Bender for Sensing Microgrippers
    T. Chu Duc; J. Wei; P. M. Sarro; G. K. Lau;
    In IEEE SENSORS 2006, EXCO,
    Daegu, Korea, Oct. 2006.
    document

  334. Electrostatically squeezed elastometers for out-of-plane microactuation
    G.K.Lau; J.F.L Goosen; F. van Keulen; P.French; P.M. Sarro;
    In APCOT 2006,
    Singapore, Jun. 2006.
    document

  335. Particle filters integrated inside a silicon wafer
    W.Venstra; N.P. Pham; P.M. Sarro; J. van Eijk;
    Microlelectronic Engineering,
    Volume 78-79, 2005.

  336. Evaluation of an empirical mdel to estimate and optimize mechanical properties of PECVD SiC films
    H.T.M.Hoa; C.de Boer; P.M. Sarro;
    Journal of the Electrochemical Society,
    Volume 152, Issue 11, 2005.

  337. Spray coating of photoresist for pattern transfer on high topography surfaces
    N P Pham; J.N.Burghartz; P.M. Sarro;
    J. Micromech. Microeng.,
    Volume 15, pp. 691-697, 2005.

  338. Plasma-assisted atomic layer deposition of TiN films at low deposition temperature for high-aspect ratio applications, Materials
    S.B.S. Heil; E. Langereis; F. Roozeboom; A. Kemmeren; N.P. Pham; P.M. Sarro; M.C.M. van de Sanden; W.M.M. Kessels;
    In Technology and Reliability of Advanced Interconnects 2005,
    pp. B6.4.1-B6.4.6, 2005.
    document

  339. Lateral nanoNewton force sensing piezocantilevers for microparticle handling
    C.D.Trinh; J.F. Creemer; P.M. Sarro;
    In Proc. MME,
    2005.
    document

  340. In-package MEMS-based thermal actuators for micro-assembly
    V. Henneken; M. Tichem; P.M. Sarro;
    In Proc. MME,
    2005.

  341. Non-Catalyst and Low Temperature Growth of Vertically Aligned Carbon Nanotubes for Nanosensor Arrays
    H.T.M. Hoa; C. de Boer; P.M. Sarro;
    In Proc. Transducers 2005,
    pp. 97-100, 2005.
    document

  342. Highly Controllable Electrochemical Deep Etching Process On Silicon
    Y.Chen; L.Wang; P.M. Sarro;
    In Proc. IEEE MEMS 2005 Conf,
    2005.
    document

  343. Porous silicon layeras a conformal insulator layer for high aspect ratio through wafer interconnects
    N.P. Pham; G.P. Salvador; P.M. Sarro;
    In Proc. Eurosensors XIX,
    2005.

  344. Integrated antiresonant hollow core waveguids as platforms for microoptical microfluidic TAS applications
    R. Bernini; E. De Nuccio; F. Mottola; A. Minardo; P.M. Sarro; L. Zeni;
    In Proc. Eurosensors XIX,
    2005.

  345. The fabrication of optical hole-arrays for use in the atto-liter plate device for single molecule detection
    O.M. Piciu; M.C. van der krogt; M. Docter; P.M. Sarro; A.Bossche;
    In Proc. Eurosensors XIX,
    2005.

  346. Influence of anodization parameters on the pore size and shape of anodic aluminum oxide nanotemplates
    S.H. Le; A. Camerlingo; H.T.M. Pham; P.M. Sarro;
    In Proc. Eurosensors XIX,
    2005.
    document

  347. Filter-protected photodiodes for high-throughput enzymatic analysis
    V.P. Iordanov; J.Bastermeijer; R.Ishihara; P.M. Sarro; A.Bossche; M.Vellekoop;
    IEEE Sensors Journal,
    Volume 4, Issue 5, pp. 584-588, Oct. 2004.

  348. Integrated Coulter counter based on 2-dimensional liquid aperture control
    J.H. Nieuwenhuis; F. Kohl; J. Bastemeijer; P.M. Sarro; M.J. Vellekoop;
    Sensors and Actuators B: Chemical,
    2004.

  349. Metal patterning on high topography surface for 3D RF devices fabrication
    N.P. Pham; E. Boellaard; W. Wien; L.D.M. van den Brekel; J.N. Burghartz; P.M. Sarro;
    Sensors and Actuators A,
    Volume 115, pp. 557-562, Mar. 2004.

  350. Microfluidic sensor based on integrated optical hollow waveguides
    S.Campopiano; R.Bernini; L.Zeni; P.M. Sarro;
    Optics letters,
    Volume 29, Issue 16, pp. 1894-1896, Aug. 2004.

  351. Integrated Coulter counter based on 2-dimensional liquid aperture control
    J. H. Nieuwenhuis; F. Kohl; J. Bastemeijer; P. M. Sarro; M. J. Vellekoop;
    Sensors and Actuators B,
    Volume 102, Issue 1, pp. 44-50, 2004.

  352. Arrow optical waveguides based sensors
    R.Bernini; S.Campopiano; L.Zeni; P.M. Sarro;
    Sensors and Actuators B,
    Volume 100, Issue 1-2, pp. 143-146, 2004.

  353. Photoresist Coating Methods for the Integration of Novel 3-D RF Microstructures
    N.P. Pham; E. Boellaard; J.N. Burghartz; P.M. Sarro;
    Journal of Microelectromechanical Systems,
    Volume 13, Issue 3, pp. 491-499, Jun. 2004. ISSN 1057-7157.

  354. Polymer interconnections for 3D-chip stacking technology: directional volume patterning of flexible substrates with conducting polymer wires
    C.Videlot; J. Ackermann; F.Fages; T.N.Nguyen; L.Wang; P.M. Sarro; D.Crawley; K.Nikolic; M.Forshaw;
    J. Micromech. Microeng.,
    Volume 14, pp. 1618-1624, 2004.

  355. High-speed wavefront sensor compatible with standard CMOS technology
    D. W. de Lima Monteiro; G. Vdovin; P. M. Sarro;
    Sensors and Actuators A,
    Volume 109, Issue 3, pp. 220-230, Jan. 2004.

  356. Gel-layer- assisted, directional electropolymerization: a versatile method for high resolution volume and/or surface patterning of flexible substrates with conjugated polymers
    J. Ackermann; C.Videlot; T.N.Nguyen; L.Wang; P.M. Sarro;
    Advanced Materials,
    Volume 16, Issue 19, 2004.

  357. M3: the third dimension of silicon, Advanced Micro and Nanosystems
    P.M. Sarro;
    In Enabling Technologies for MEMS and Nanodevices,
    Wiley, 2004.

  358. Particle discrimination with an improved projection cytometer
    J.H. Nieuwenhuis; P. Svasek; P.M. Sarro; M.J. Vellekoop;
    In Proceed. MicroTAS 2004,
    Malmo, Sweden, pp. 419-421, Sep. 2004.

  359. Nanostructure formation on anodic aluminum oxide nanotemplates
    H. T.M. Pham; C.R. de Boer; P. M. Sarro;
    In The Second International Workshop on Nanophysics and Nanotechnology,
    Hanoi, Vietnam, pp. 91-98, Oct. 2004.

  360. Integrated antiresonant hollow waveguide liquid sensor
    S. Campopiano; R.Bernini; L.Zeni; P.M. Sarro;
    In Proc. Eurosensors XVIII,
    Rome, pp. 765-766, Sept. 2004. ISBN: 88-7621-282-5.

  361. TiN for MEMS hotplate heaters
    J.F. Creemer; P.M. Sarro; M. Laros; H. Schellevis; L. Steenweg; H.W. Zandbergen;
    In Proc. Eurosensors XVIII,
    Rome, pp. 706-707, Sept. 2004. ISBN 88-7621-282-5.

  362. Particle size discrimination with a liquid aperture coulter counter
    J. Nieuwenhuizen; P. Svasek; P.M. Sarro; M.J. Vellekoop;
    In Proc. Eurosensors XVIII,
    Rome, pp. 317-320, Sept. 2004. ISBN: 88-7621- 282-5.

  363. Integrated Sensors Arrays For Bioluminescence And Fluorescence Bio-Chemical Analysis
    V.Iordanov; B. Iliev; A.Bossche; J. Bastemeijer; P.M. Sarro; I.T.Young; G. van Dedem; M.Vellekoop;
    In Proc. IEEE Sensors 2004 Conf.,
    2004.

  364. High-aspect-ratio bulk micromachined vias contacts
    N.P. Pham; P.M. Sarro;
    In Proc SAFE, & Prorisc 2004,
    Veldhoven, pp. 657-661, Nov. 2004. ISBN 90-73461-43X.
    document

  365. Design of in-package MST-based actuators for micro-assembly
    V. Henneken; S. van der Bedem; M. Tichem; B. Karpuschewski; P.M. Sarro;
    In Proc SAFE & Prorisc 2004,
    Veldhoven, pp. 747-752, Nov. 2004. ISBN 90-73461-43X.

  366. Titanium Nitride for MEMS Hotplates
    J.F. Creemer; P.M. Sarro; M. Laros; H. Schellevis; T. Nathoeni; L. Steenweg; V. Svetchnikov; H.W. Zandbergen;
    In Proc SAFE & Prorisc 2004,
    Veldhoven, pp. 742-746, Nov. 2004. ISBN 90-73461-43X.

  367. Characterization of ferroelectric thin films materials for FeRAM
    S.H. Le; B. R. Salmassi; J. N. Burghartz; P.M. Sarro;
    In Proc SAFE & Prorisc 2004,
    Veldhoven, pp. 710-713, Nov. 2004. ISBN 90-73461-43X.

  368. A quantitative evaluation of pattern transfer across (111) surfaces in a (100) silicon wafer by contact masking and over-exposure
    W. Venstra; M. Laros; J.W. Spronck; P.M. Sarro; J. van Eijk;
    In Proc. Eurosensors XVIII,
    Rome, pp. 313-316, Sept. 2004. 88-7621-282-5.

  369. Spatial light modulators based on micromachined reflective membranes on viscoelastic layers
    S. Sakarya; G. Vdovin; P.M. Sarro;
    Sensors and Actuators A,
    Volume 108, Issue 1-3, pp. 271-275, Nov. 2003.

  370. Three terminals optoelectronics devices integrated into a silicon on silicon waveguide
    G. Coppola; A. Irace; G. Breglio; M. Iodice; L. Zeni; A. Cutolo; P.M. Sarro;
    Optics and Lasers Engineering,
    Volume 39, Issue 3, pp. 317-332, Mar. 2003. ISSN 0143-8166.

  371. Transient analysis of a high-speed thermo-optic modulator integrated in an all-silicon waveguide
    M. Iodice; F.G. Della Corte; I. Rendina; P.M. Sarro; M. Bellucci;
    Optical-Engineering,
    Volume 42, Issue 1, pp. 169-175, Jan. 2003.

  372. Electrical Characteristics of Plasma-Enhanced Chemical Vapor Deposited Silicon Carbide Thin Films
    H.T.M. Pham; T. Akkaya; C.R. de Boer; P.M. Sarro;
    Material Science Forum,
    Volume 433-436, pp. 451-454, 2003. ISSN 0255-5476.

  373. Fabrication of crystalline membranes oriented in the (111) plane in a (100) silicon wafer
    W.J. Venstra; P.M. Sarro;
    Microelectronic Engineering,
    Volume 67-68, pp. 502-507, Jun. 2003.

  374. 3D molecular interconnection technology
    D. Crawley; K. Nikolic; M. Forshaw; J. Ackermann; C. Videlot; T.N. Nguyen; L. Wang; P.M. Sarro;
    J. Micromech. Microeng,
    Volume 13, Issue 5, pp. 655-662, Jun. 2003.

  375. Planar antiresonant reflecting optical waveguides as integrated optical refractometer
    R. Bernini; S. Campopiano; L. Zeni; C. de Boer; P.M. Sarro;
    IEEE Sensors Journal,
    Volume 3, Issue 5, pp. 652-657, Oct. 2003.

  376. Self-Adjustment of Micro-mechatronic Systems
    M. Tichem; B. Karpuschewski; P.M. Sarro;
    Annals of the CIRP,
    Volume 52, Issue 1, pp. 17-20, 2003.

  377. Micro-patterning of self-supporting layers with conducting polymer wires for 3D-chip interconnection applications
    J. Ackermann; C. Videlot; T.N. Nguyen; L. Wang; P.M. Sarro; D. Crawley; K. Nikoli; M. Forshaw;
    Applied Surface Science,
    Volume 212-213, pp. 411-416, May 2003.

  378. M3: the third dimension of silicon
    P.M. Sarro;
    Delft University of Technology: , Apr. 2003. ISBN 90-75774-02-8.

  379. Technological approaches for fabrication of elastomer based spatial light modulators
    S. Sakarya; G. Vdovin; P.M. Sarro;
    In Proc. SPIE,
    pp. 279-286, 2003. ISSN 0277-786X.

  380. Through-Wafer Electrical Vias for RF Silicon technology
    Z. Wang; L. Wang; H. Schellevis; W. Wien; J.N. Burghartz; P.M. Sarro;
    In Proc. SAFE 2003,
    Veldhoven, The Netherlands, pp. 761-765, Nov. 2003. ISBN 90-73461-39-1.

  381. Experimental results of a three-terminal optical modulator based on a BMFET device
    A. Irace; G. Breglio; M. Tordi; G. Coppola; C.R. de Boer; P.M. Sarro;
    In Proc. of SPIE,
    Brugge, Belgium, pp. 125-132, Oct. 2003. ISSN 0277-786X.
    document

  382. Liquid crystal wavefront corrector with modal response
    M. Loktev; G. Vdovin; P.M. Sarro;
    In Proc. Eurosensors XVII,
    University of Minho, Guimaraes, Portugal, pp. 598-599, Sep. 2003.

  383. Wafer thinning for high-density, through-wafer interconnects
    L. Wang; C.C.G. Visser; C.R. de Boer; M. Laros; W. van der Vlist; J. Groeneweg; G. Craciun; P.M. Sarro;
    In Proc. of SPIE,
    San Jose, CA, pp. 532-539, Jan. 2003. ISSN 0277-786X.
    document

  384. Fabrication of a microfluidic chip for PCR applications
    M. Bu; B. Husband; T. Melvin; G. ensell; N.P. Pham; P.M. Sarro; J.S. Wilkinson; A.G.R. Evans;
    In Proc. MME 2003,
    Delft, The Netherlands, pp. 119-122, Nov. 2003. ISBN 90-808266-1-8.
    document

  385. A model for film thickness using direct spray coating
    N.P. Pham; J.N. Burghartz; P.M. Sarro;
    In Proc. IEEE EPTC conference,
    Singapore, Dec. 2003.
    document

  386. Metal patterning on high topography surface for 3-D RF devices fabrication
    N.P. Pham; E. Boellaard; W. Wien; L.D.M. van den Brekel; J.N. Burghartz; P.M. Sarro;
    In Proc. Eurosensors XVII,
    University of Minho, Guimaraes, Portugal, pp. 440-443, Sep. 2003.

  387. Integrated optical refractometer based on rib-ARROW waveguide
    R. Bernini; S. Campopiano; L.Zeni; P.M. Sarro;
    In Proc Eurosensors XVII,
    University of Minho, Guimaraes, Portugal, pp. 139-142, Sep. 2003.
    document

  388. High Aspect Ratio through-Wafer Interconnections for 3D-Microsystems
    L. Wang; A. Nichelatti; H. Schellevis; C. de Boer; C. Visser; T.N. Nguyen; P.M. Sarro;
    In Proc. 16th IEEE International MEMS conference,
    Kyoto, Japan, pp. 634-637, Jan. 2003.
    document

  389. Technology of reflective membranes for spatial light modulators
    S. Sakarya; G. Vdovin; P.M. Sarro;
    Sensors and Actuators A,
    Volume 97-98, pp. 468-472, Apr. 2002.

  390. Silicon thin-film UV filter for NADH fluorescence analysis
    V.P. Iordanov; G.W. Lubking; R. R. IshiharaF. Wolffenbuttel; P.M. Sarro; M.J. Vellekoop;
    Sensors and Actuators A,
    Volume 97-98, pp. 161-166, Apr. 2002.

  391. X-ray spectroscopy with a Multi-anode Sawtooth Silicon Drift Detector: the diffusion process
    J. Sonsky; R.W.Hollander; P.M. Sarro; C.W.E. van Eijk;
    Nucl. Instr. and Meth. A,
    Volume 477, pp. 93-98, 2002. ISSN 0168-9002.

  392. Through-wafer copper electroplating for 3-D interconnects
    N.T. Nguyen; E. Boellaard; N.P. Pham; V.G. Kutchoukov; G. Craciun; P.M. Sarro;
    Journal of Micromechanics and Microengineering,
    Volume 12, Issue 4, pp. 395-399, Jul. 2002. ISSN 0960-1317.

  393. Fabrication of a glass-implemented microcapillary electrophoresis device with integrated contactless conductivity detection
    A. Berthold; F. Laugere; H. Schellevis; C.R. de Boer; M. Laros; R.M. Guijt; P.M. Sarro; M.J. Vellekoop;
    Electrophoresis,
    Volume 23, Issue 20, pp. 3511-3519, Oct. 2002. ISSN 0173-0835.

  394. Agile beams and micromachined membrane deformable mirrors
    G. Vdovin; P.M. Sarro;
    In The 15th Annual Meeting of the IEEE Lasers and Electro-Optics Society (LEOS 2002),
    pp. 576-577, 2002. ISBN 0-7803-7500-9.

  395. Self-adjustment of optical interconnects using in-package MEMS-based actuators
    K.J. van Nielen; W.J. Venstra; M. Tichem; M. Laros; P.M. Sarro; B. Karpuschewski;
    In J. Saneistr; P. Ripka (Ed.), Proceedings Eurosensors XVI,
    Prague, Czech Republic, Czech Technical University, pp. 794-797, Sep. 2002.

  396. Development of a silicon-based modal liquid crystal wavefront corrector
    M.Y. Loktev; G.V. Vdovin; P.M. Sarro;
    In Proc. SPIE: Photonics, Devices, and Sytems II,
    Prague, Czech Republic, pp. 558-564, May 2002.

  397. Substrate Options and Add-On Process Modules for Monolithic RF Silicon Technology
    J.N. Burghartz; M. Bartek; B. Rejaei; P.M. Sarro; A. Polyakov; N.P. Pham; E. Boullaard; K.T. Ng;
    In Proc. 2002 Bipolar/BiCMOS Circuits and Technology Meeting (BCTM 2002),
    Monterey, CA, pp. 17-23, Sept. 2002. ISBN 0-7803-7562-9.

  398. Technological aspects of a custom CMOS sensor for adaptive optics
    D. de Lima Monteiro; G.V. Vdovin; P.M. Sarro;
    In Proc. SPIE: Photonics, Devices, and Sytems II,
    Prague, Czech Republic, pp. 31-36, May 2002.

  399. Arrays of spherical micromirrors and molded microlenses fabricated with bulk Si micromachining
    G.V. Vdovin; O. Akhzar Mehr; P.M. Sarro; D.W. de Lima Monteiro; M.Y. Loktev;
    In Proc. SPIE: MEMS/MOEMS: Advances Photonic Communications, Sensing, Metrology, Packaging and Assembly,
    Brugge, Belgium, pp. 107-111, Oct. 2002.

  400. Low-cost technological approaches to micromachined spatial light modulators
    S. Sakarya; G. Vdovin; P.M. Sarro;
    In Proc. SPIE: High-Resolution Wavefront Control: Methods, Devices, and Applications IV,
    Seattle, WA, USA, pp. 264-271, Jul. 2002.

  401. Modal corrector integrated in silicon: possibilities for implementation
    M.Y. Loktev; G.V. Vdovin; P.M. Sarro;
    In Proc. SPIE: Optics Atmospheric Propagation and Adaptive Systems V,
    Agia Pelagia, Greece, pp. 196-205, Sept. 2002.

  402. Fabrication technology for micromachined spatial light modulators
    S. Sakarya; G. Vdovin; P.M. Sarro;
    In Proc. SPIE: Integrated Optical Devices: Fabrication and Testing,
    Brugge, Belgium, pp. 219-226, Oct. 2002.

  403. CMOS-compatible wells for integrated high-speed screening arrays
    B.L. Gray; R. Moerman; L.R. van den Doel; H.R. Dietrich; V.P. Iordanov; N.P. Pham; L.M. Sarro; A. Bossche; M.J. Vellekoop;
    In Proc. SPIE: Biomedical Nanotechnology Architectures and Applications,
    pp. 103-108, Jan. 2002.

  404. Technology for integrated spatial light modulators based on reflective membranes
    S. Sakarya; G.V. Vdovin; P.M. Sarro;
    In J.D. Gonglewski; M.A. Vorontsov; M.T. Gruneisen (Ed.), Proc. SPIE: High-Resolution Wavefront Control: Methods, Devices, and Applic. III,
    pp. 21-28, Feb. 2002.

  405. Technology for Integrated Spatial Light Modulators based on Viscoelastic Layers
    S. Sakarya; G. Vdovin; P.M. Sarro;
    In Proc. SeSens 2002,
    Veldhoven, The Netherlands, STW, pp. 672-675, Nov. 2002. ISBN 90-73461-33-2.

  406. Electrical and Optical Properties of PECVD SiC Thin Films for Surface Micromachined Devices
    H.T.M. Pham; T. Akkaya; C. de Boer; C.C.G. P. Visser.M. Sarro;
    In Proc. SeSens 2002,
    Veldhoven, The Netherlands, STW, pp. 662-666, Nov. 2002. ISBN 90-73461-33-2.

  407. Customized CMOS wavefront sensor
    D.W. de Lima Monteiro; G.V. Vdovin; J.G. Rocha; V.P. Iordanov; M.Y. Loktev; P.M. Sarro;
    In J.D. Gonglewski; M.A. Vorontsov; M.T. Gruneisen (Ed.), Proc. SPIE: High-Resolution Wavefront Control: Methods, Devices, and Applic. III,
    pp. 88-99, Feb. 2002.

  408. Photoresist wells for integrated high-speed screening arrays
    B.L. Gray; R. Moerman; L.R. van den Doel; V.P. Iordanov; N.P. Pham; P.M. Sarro; A. Bossche; M.J. Vellekoop;
    In Proc. SESENS 2002,
    Veldhoven, The Netherlands, pp. 791-794, Nov. 2002. ISBN 90-73461-28-6.

  409. Filtered Photodiode Arrays for NADH Fluorescence Analysis
    V.P. Iordanov; J. Bastemeijer; R. Ishihara; P.M. Sarro; A. Bossche; M. Vellekoop;
    In Proc. SeSens 2002,
    Veldhoven, The Netherlands, STW, pp. 627-630, Nov. 2002. ISBN 90-73461-33-2.

  410. Fluorescence Measurements in Thick-Film Polymer Wells
    B.L. Gray; V.P. Iordanov; R. van den Doel; P.M. Sarro; A. Bossche;
    In Proc. SeSens 2002,
    Veldhoven, The Netherlands, STW, pp. 622-626, Nov. 2002. ISBN 90-73461-33-2.

  411. Spin, Spray and Eloctroplating of Photoresist for MEMS Structures: A Comparison
    N.P. Pham; E. Boellaard; P.M. Sarro; J.N. Burghartz;
    In Proc. SAFE 2002,
    Veldhoven, The Netherlands, STW, pp. 81-86, Nov. 2002. ISBN 90-73461-33-2.

  412. Thinning of Micromachined Wafers for High-Density, Through-Wafer Interconnects
    L. Wang; C.C.G. Visser; C. de Boer; M. Laros; W. van der Vlist; J. Groeneweg; G. Craciun; P.M. Sarro;
    In Proc. SAFE 2002,
    Veldhoven, The Netherlands, STW, pp. 121-126, Nov. 2002. ISBN 90-73461-33-2.

  413. Planar Antiresonant Reflecting Optical Waveguides as Sensors for Liquid Substances
    R. Bernini; S. Campopiano; L. Zeni; C. de Boer; P.M. Sarro;
    In Proc. IEEE Sensors 2002,
    Orlando, Florida, USA, pp. 13.4/1-13.4/4, Jun. 2002. ISBN 0-7803-7455-X.

  414. Through-Wafer Copper Electroplating for RF Silicon Technology
    N.T. Nguyen; K. Ng; E. Boellaard; N.P. Pham; G. Craciun; P.M. Sarro; J.N. Burghartz;
    In Proc. ESSDERC 2002,
    Firenze, Italy, University of Bologna, pp. 255-258, Sep. 2002. ISBN 88-900847-8-2.

  415. CMOS-Compatible Optical Filter for High-Throughput Enzymatic-Analysis Devices
    V.P. Iordanov; R. Ishihara; P.M. Sarro; J. Bastemeijer; A. Bossche; M.J. Vellekoop;
    In IEEE Sensors 2002,
    Hyatt Orlando, Orlando, Florida, USA, pp. 9.6/1-9.6/4, Jun. 2002. ISBN 0-7803-7455-X.

  416. Fabrication of Crystalline Membranes Oriented in the (111) plane in a (100) Silicon Wafer
    W.J. Venstra; P.M. Sarro;
    In Micro- and NanoEngineering 2002 International Conference,
    Lugano, Switzerland, pp. 226-227, Sep. 2002.

  417. Electronic baseline-suppression for liquid conductivity detection in a capillary electrophoresis microchip
    F. Laugere; J. Bastemeijer; G. van der Steen; M.J. Vellekoop; P.M. Sarro; A. Bossche;
    In IEEE Sensors 2002,
    Hyatt Orlando, Orlando, Florida, USA, pp. 20.3/1-20.3/4, Jun. 2002. ISBN 0-7803-7455-X.

  418. Self-adjustment of optical interconnects using in-package MEMS-based actuators
    K.J. van Nielen; W.J. Venstra; M. M. Tichem. Laros; P.M. Sarro; B. Karpuschewski;
    In Eurosensors XVI - Part 2,
    Prague, Czech Republic, Czech Technical University, pp. 457-458, Sep. 2002. ISBN 80-01-02576-4.

  419. Electrical characteristics of plasma enhanced chemical vapor deposition silicon carbide thin films
    H.T.M. Pham; T. Akkaya; C.R. de Boer; P.M. Sarro;
    In Fourth European Conference on Silicon Carbide and Related Materials (ECSCRM 2002),
    Linkoping, Sweden, Sep. 2002.

  420. Integrated Coulter counter with non-coaxial sheath-flow and dynamic aperture control
    J.H. Nieuwenhuis; J. Bastemeijer; P.M. Sarro; M.J. Vellekoop;
    In J. Saneistr; P. Ripka (Ed.), Eurosensors XVI - Part 1,
    Prague, Czech Republic, Czech Technical University, pp. 699-700, Sep. 2002. ISBN 80-01-02576-4.

  421. In-situ doped PECVD SiC for surface micromachined devices
    H.T.M. Pham; C.R. de Boer; L.S. Pakula; P.M. Sarro;
    In J. Saneistr; P. Ripka (Ed.), Eurosensors XVI - Part 1,
    Prague, Czech Republic, Czech Technical University, pp. 119-120, Sep. 2002. ISBN 80-01-02576-4.

  422. Direct spray coating of photoresist - a new method for patterning 3-D structures
    N.P. Pham; T.L.M. Scholtes; R. Klerks; E. Boellaard; P.M. Sarro; J.N. Burghartz;
    In J. Saneistr; P. Ripka (Ed.), Eurosensors XVI - Part 1,
    Prague, Czech Republic, Czech Technical University, pp. 89-90, Sep. 2002. ISBN 80-01-02576-4.

  423. Realization of High Aspect Ratio Interconnections Based on Macroporous Silicon
    A. Nichelatti; T. Nguyen; P.M. Sarro;
    In J. Saneistr; P. Ripka (Ed.), Eurosensors XVI - Part 1,
    Prague, Czech Republic, Czech Technical University, pp. 97-98, Sep. 2002. ISBN 80-01-02576-4.

  424. Thin photodiodes for a neutron scintillator silicon-well detector
    C.P. Allier; R.W. Hollander; C.W.E. van Eijk; P.M. Sarro; M. de Boer; J.B. Czirr; J.P. Chaminade; C. Fouassier;
    IEEE Transactions on Nuclear Science,
    Volume 48, Issue 4, pp. 1154-1157, Aug. 2001.

  425. Multi-anode sawtooth SDD for X-ray spectroscopy fabricated on NTD wafers
    J. Sonsky; R.W. Hollander; C.W.E. van Eijk; P.M. Sarro; V. Kouchpil;
    IEEE Trans. on Nuclear Science,
    Volume 48, pp. 258-261, 2001. ISSN 0018-9499.

  426. IC-compatible two-level bulk micromachining process module for RF silicon technology
    N.P. Pham; P.M. Sarro; K.T. Ng; J.N. Burghartz;
    IEEE Tr. Electron Devices,
    Volume 48, Issue 8, pp. 1756-1764, Aug. 2001.

  427. Si Based Thin-Film Filter with High Visible-Over-UV Selectivity for Biochemical Fluorescence Analysis
    V.P. Iordanov; G.W. Lubking; R. R. Ishihara; R.F. Wolffenbuttel; P.M. Sarro; M.J. Vellekoop;
    In The 11th Intern. Conf. on Solid-State Sensors and Actuators (Transducers 01),
    Munich, Germany, pp. 1182-1185, Jun. 2001. ISBN 3-540-42150-5.

  428. Thermophysical Characterisation of PolySi0.7Ge0.3 for Use in Thermoelectric Devices
    D.D.L. Wijngaards; S.H. Kong; P.M. Sarro; R.F. Wolffenbuttel;
    In The 11th International Conference on Solid-State Sensors and Actuators (Transducers 01),
    Munich, Germany, pp. 1010-1013, Jun. 2001. ISBN 3-540-42150-5.
    document

  429. Technology of reflective membranes for spatial light modulators
    S. Sakarya; G.Vdovin; P.M. Sarro;
    In The 11th Intern. Conf. on Solid-State Sensors and Actuators (Transducers 01),
    Munich, Germany, pp. 1336-1339, Jun. 2001. ISBN 3-540-42150-5.
    document

  430. Direct Spray Coating of Photoresist for MEMS applications
    N.P.Pham; T.M.L.Scholtes; R.Klerk; B.Wieder; P.M. Sarro; J.N.Burghartz;
    In Proceedings of the SPIE,
    San Fransisco, USA, pp. 312-319, Oct. 2001. ISBN 0-8194-4285-2.
    document

  431. Temperature Optical Sensor based on all silicon Bimodal Waveguide
    G. Coppola; C. R. de Boer; G. Breglio; M. Iodice; A. Irace; P. M. Sarro;
    In Proceedings of SESENS 2001,
    Veldhoven, The Netherlands, pp. 777-782, 2001. ISBN 90-73461-29-4.
    document

  432. Evaluation of In-Situ Doped PECVD SiC Thin Films for Surface Micromachining
    H.T.M. Pham; C.R. de Boer; C. Kwakernaak; W.G. Sloof; P.M. Sarro;
    In Proceedings of SESENS 2001,
    Veldhoven, The Netherlands, pp. 856-860, 2001. ISBN 90-73461-29-4.
    document

  433. Dry Etching Release of Structures in Post-Process Surface Micromachining using Polyimide as a Sacrificial Layer
    A. Bagolini; H.T.M. Pham; T.L.M. Scholtes; L. Pakula; P.M. Sarro;
    In Proceedings of SESENS 2001,
    Veldhoven, The Netherlands, pp. 769-772, 2001. ISBN 90-73461-29-4.
    document

  434. Optoelectronic Modulator Realized by a Fully Compatible Bipolar Process
    G. Coppola; C.R. de Boer; G. Breglio; A. Irace; P. M. Sarro;
    In Proceedings of SAFE 2001,
    Veldhoven, The Netherlands, pp. 24-29, 2001. ISBN 90-73461-29-4.

  435. Wafer Thinning for Highly Dense 3D Electronic Structures
    L. Wang; P.M. Sarro;
    In Proceedings of SAFE 2001,
    Veldhoven, The Netherlands, pp. 214-219, 2001. ISBN 90-73461-29-4.
    document

  436. Through-wafer Copper plug formation for 3-dimensional ICs
    T.Nguyen Nhu; E Boellard; N.P.Pham; V.G.Kutchukov; G.Craciun; P.M. Sarro;
    In Proceedings of SAFE 2001,
    Veldhoven, The Netherlands, pp. 141-144, 2001. ISBN 90-73461-29-4.

  437. Through-wafer copper electroplating for 3-D interconnects
    N.T.Nguyen; E. Boellaard; N.P.Pham; G.Craciun; V.G.Kutchoukov; P.M. Sarro;
    In M.Hill; B.Lane (Ed.), Proceedings MME 2001,
    Cork-Ireland, pp. 74-77, Sept. 2001.

  438. Spray coating of AZ4562 photoresist for MEMS applications
    N.P.Pham; P.M. Sarro; J.N.Burghartz;
    In Proceedings of SAFE 2001,
    Veldhoven, The Netherlands, 2001. ISBN 90-73461-28-6.

  439. Technology for Spatial Light Modulators based on Reflective Silicon Structures
    S. Sakarya; G.Vdovin; P.M. Sarro;
    In Proc. Sensor Technology Conference,
    The Netherlands, pp. 25-30, 2001.
    document

  440. Flexible silicon micromachined structures for use in integrated spatial light modulators
    S. Sakarya; G. Vdovin; P.M. Sarro;
    In Proc. SeSens 2001,
    Veldhoven, The Netherlands, STW, pp. 861-864, Nov., 2001 2001. ISBN 90-73461-?.
    document

  441. Micromachined Si-well scintillator pixel sensors for thermal neutron detection
    C.P. Allier; R.W. Hollander; C.W.E. van Eijk; M. de Boer; J.G.E. Gardeniers; P.M. Sarro; J.B. Czirr;
    In M. Elwenspoek (Ed.), Proc. Sensor Technology Conf,
    Enschede, The Netherlands, pp. 191-196, May 2001. ISBN 0-7923-7012-0.
    document

  442. Polyimide sacrificial layer for post-processing surface micromachining
    A. Bagolini; T.L.M. Scholtes; H.T.M. Pham; L. Pakula; P.M. Sarro;
    In M.Hill; B.Lane (Ed.), Proc. MME 2001,
    Cork, Ireland, pp. 58-61, Sept. 2001.

  443. Integrated high rejection filter for NADH fluorescence measurements
    V.P. Iordanov; G.W. Lubking; P.M. Sarro; R.F. Wolffenbuttel; M.J. Vellekoop;
    In Proc. Sensor2001,
    Nurnberg, Germany, May 2001.

  444. A Micromachining Post-Process Module with Pattern Transfer in Deep Cavities for RF Silicon Technology
    N.P. Pham; P.M. Sarro; K. Ng; J.N. Burghartz;
    In Proc. MEMS 2001,
    Interlaken, Switzerland, pp. 345-348, Jan. 2001. ISBN 0-7803-5998-4.

  445. Influence of deposition parameters and temperature on stress and strain of in-situ doped PECVD Silicon carbide
    H.T.M. Pham; C.R. de Boer; L. Pakula; P.M. Sarro;
    In S. Yoshida et al. (Ed.), Proc. International Conference on Silicon Carbide and Related Materials 2001 (ICSCRM2001),
    Tsukuba, Japan, pp. 759-762, Oct. 2001. ISBN 0-87849-X.

  446. Integrated Hartmann-Shack wavefront sensor
    D.W. de Lima Monteiro; A. Vilaca; G. Vdovin; M. Loktev; P.M. Sarro;
    In Proc. 3rd Adaptive optics conference for Industry and Medicine,
    Albuquerque, USA, pp. 179-183, 2001.

  447. Mechanical and structural properties of in-situ doped PECVD SiC layers for post-processing surface micromachining
    H.T.M. Pham; C.R. de Boer; C. Kwakernaak; W.G. Sloof; P.M. Sarro;
    In Proc of SPIE Micromachining and Microfabrication,
    San Francisco, CA, pp. 272-279, 2001. ISBN 0-8194-4285-2.

  448. Effect of annealing on mechanical and optical properties of in-situ doped sic thin films
    H.T.M. Pham; C.R. de Boer; C.C.G. P. Visser.M. Sarro;
    In Proc of SPIE International Symposium on Optoelectronics and Microelectronics,
    Nanjing, China, pp. 59-66, 2001. ISBN 0-8194-4340-9.

  449. Integrated RF passive components - discrete vs. distributed
    J.N. Burghartz; K.T. Ng; N.P. Pham; B. Rejaei; P.M. Sarro;
    In Device Research Conference,
    pp. 113-114, 2001.
    document

  450. Silicon carbide as a new MEMS technology
    P.M. Sarro;
    Sensors and Actuators A,
    Volume 82, pp. 210-218, 2000. ISSN 0924-4247.

  451. Effect of Surfactant on Surface Quality of Silicon Microstructures Etched in Saturated TMAHW Solutions
    P.M. Sarro; D. Brida; W. van der Vlist; S. Brida;
    Sensors and Actuators A,
    Volume 85, pp. 340-345, 2000. ISSN 0924-4247.

  452. Glass-to-glass anodic bonding with standard IC technology thin films as intermediate layers
    A. Berthold; L. Nicola; P.M. Sarro; M.J. Vellekoop;
    Sensors and Actuators A,
    Volume 82, Issue 1-3, pp. 224-228, 2000.

  453. Design and fabrication of infrared detector arrays for satellite attitude control
    A.W. van Herwaarden; F.G. van Herwaarden; S.A. Molenaar; E.J.G. Goudena; M. Laros; P.M. Sarro; C.A. Schot; W. van der Vlist; L. Blarre; J.P. Krebs;
    Sensors and Actuators A,
    Volume 83, pp. 101-108, 2000.

  454. Micro-CAT with redundant electrodes (CATER)
    F.D. van den Berg; C.W.E. van Eijk; R.W. Hollander; P.M. Sarro;
    Nuclear Instruments and Methods Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment,
    Volume 453, Issue 3, pp. 530-535, Oct. 2000.

  455. Scintillation light read-out by low-gain thin avalanche photodiodes in silicon wells
    C.P. Allier; R.W. Hollander; P.M. Sarro; M. de Boer; C.W.E. van Eijk;
    IEEE Trans. on Nuclear Science,
    Volume 47, Issue 4, pp. 1303-1306, 2000.

  456. X-ray Detection With Multi-anode Sawtooth Silicon Drift Detectors
    J. Sonsky; J. Huizenga; R.W. Hollander; C.W.E. van Eijk; P.M. Sarro;
    IEEE Trans. Nucl. Sci.,
    Volume 47, Issue 3, pp. 750-755, 2000. ISSN 0018-9499.

  457. Silicon drift detector with reduced lateral diffusion: experimental results
    J. Sonsky; H. Valk; J. Huizenga; R.W. Hollander; C.W.E. van Eijk; P.M. Sarro;
    IEEE Nucl. Instrum. and Meth. Phys. Res. A,
    Volume 439, Issue 2-3, pp. 513-518, 2000.

  458. Scintillation light read-out by thin photodiodes in silicon wells
    C.P. Allier; R.W. Hollander; P.M. Sarro; C.W.E. van Eijk;
    IEEE Nuclear Instruments & Methods Physics Research A,
    Volume 442, pp. 255-258, 2000.

  459. Low-loss small cross-section silicon-on-silicon rib waveguides with high-confining ion-implanted lower cladding
    M. Iodice; G. Cocorullo; F. G. Della Corte; T. Polichetti; I. Rendina; P. M. Sarro;
    In SPIE Photonics West Conf.,
    San Jose, Ca, USA, pp. 120-126, Jan. 2000.

  460. A Micromachining Post-Process Module for RF Silicon Technology
    N.P. Pham; K.T. Ng; M. Bartek; P. M. Sarro; B. Rejaei; J.N. Burghartz;
    In Proc. IEDM 2000,
    San Francisco, USA, pp. 481-484, Dec. 2000. ISBN 0-7803-6438-4.

  461. Infrared Thermal Imaging of SiNx membranes
    A. Irace; G. Breglio; P. Spirito; P.M. Sarro;
    In SPIE Photonics West Conf.,
    San Diego, USA, Jul. 2000.

  462. Fluorescence analysis in subnanoliter reactor wells: evaluation of different possible illumination configurations
    Iordanov V.; W. Lubking; P.M. Sarro; M.J. Vellekoop;
    In SeSens 2000,
    pp. 643-645, Dec. 2000.

  463. Technology of reflective micromachined pixelated membranes for use in spatial light modulators
    Sakarya S.; G. Vdovin; P.M. Sarro;
    In SeSens 2000,
    pp. 689-691, Dec. 2000. ISBN 90-73461-24-3.

  464. Multisensing in Subnanoliters High-Speed Screning (HSS) Arrays
    M.J. Vellekoop; K.T. Hjelt; G.W. Lubking; J. Bastermeijer; P.M. Sarro; et al;
    In Proc. XIV Eurosensors Conf.,
    Copenhagen, Denmark, pp. 39-42, Aug. 2000. ISBN 87-89935-50-0.

  465. Micromachined membrane deformable mirrors for space applications
    G. Vdovin; P.M. Sarro; S. Manhart; Z. Sodnik;
    In Proc. XIV Eurosensors Conf.,
    Copenhagen, Denmark, pp. 559-560, Aug. 2000.

  466. Integrated shape sensor for particles and cells based on optical projection
    J.H. Nieuwenhuis; G.W. Lubking; A. Berthold; P.M. Sarro; M.J. Vellekoop;
    In Proc. XIV Eurosensors Conf.,
    Copenhagen, Denmark, pp. 891-894, Aug. 2000.

  467. Two-step glass-etching for microfluidic devices
    A. Berthold; P.M. Sarro; M.J. Vellekoop;
    In Proc. SeSens 2000 workshop,
    Veldhoven, pp. 613-616, Dec. 2000.

  468. Reflective 2D pixelated membranes for micromachined spatial light modulators
    S. Sakarya; G. Vdovin; P.M. Sarro;
    In Proc. XIV Eurosensors Conf.,
    Copenhagen, Denmark, pp. 333-336, Aug. 2000. ISBN 87-89935-50-0.

  469. A novel micromachining process using pattern transfer over large topography for RF components
    N.P. Pham; P.M. Sarro; K.T. Ng; R. Behzad; J.N. Burghartz;
    In Proc. SAFE,
    Veldhoven, pp. 125-128, 2000. ISBN 90-73461-24-3.

  470. A Sub-Surface Metallization Post-Process IC Module for RF Technology
    K.T. Ng; N.P. Pham; B. Rejaei; P.M. Sarro; J.N. Burghartz;
    In Proc. of IEEE BCTM,
    Minneapolis, pp. 195-198, Sept. 25-27 2000. ISBN 0-7803-6384-1.

  471. IC-compatible Two-level Bulk Micromachining for RF Silicon Technology
    N.P. Pham; P.M. Sarro; K.T. Ng; J.N. Burghartz;
    In Proc. ESSDERC,
    Cork, Ireland, pp. 204-207, Sept. 2000. ISBN 2-86332-248-6.

  472. IC-compatible process for pattern transfer in deep wells for integration of RF components
    N.P.Pham; P.M. Sarro; J.N.Burghartz;
    In J.M.Karam; Y.Yasitis (Ed.), Proc of SPIE Micromachining and Microfabrication Process Technology VI,
    Santa Clara, pp. 390-397, Sept. 2000. ISSN 0277-786X.

  473. Characterization of a Bullk-Micromachined Post-Process Module for Silicon RF Technology
    K.T. Ng; N.P. Pham; P.M. Sarro; B. Rejaei Salmassi; J.N. Burghartz;
    In IEEE topical meeting on Silicon Monolithic integrated Circuits RF systems,
    pp. 99-102, Apr. 2000.

  474. Measurement of thermal conductivity and diffusivity of single and multilayer membranes
    A. Irace; P.M. Sarro;
    Sensors and Actuators,
    Volume A76, Issue 1-3, pp. 323-328, 1999.

  475. Technology and applications of micromachined adaptive mirrors
    G,Vdovin; P.M. Sarro; S.Middelhoek;
    J.Micromech. Microeng.,
    Volume 9, pp. 8-20, 1999. ISSN-0960-1317.

  476. Electron confinement in multi-anode saw tooth silicon drift detectors with an anode pitch of 250µm
    J. Sonsky; H.Valk; J.Huizenga; and R.W.Hollander; C.W.E. van Eijk; P.M. Sarro;
    IEEE Trans on Nucl. Science,
    Volume 46, Issue 3, pp. 271-274, 1999. ISSN 0018-9499.

  477. Thin photodiodes for a scintillator-silicon well detector
    C.P. Allier; R.W. Hollander; P.M. Sarro; C.W.E. van Eijk;
    IEEE Trans. on Nuclear Science,
    Volume 46, Issue 6, pp. 1948-1951, 1999.

  478. Diminished electron cloud broadening in a silicon drift detector by sawtooth p+ strips
    J. Sonsky; H.Valk; C. P. Allier; R.Hollander; C.W.E. van Eijk; P.M. Sarro;
    IEEE Trans on Nucl. Science,
    Volume 46, Issue 1, pp. 53-58, 1999. ISSN 0018-9499.

  479. One- and two-dimensional CMOS position-sensitive detectors
    D.W. de Lima Monteiro; G.Vdovin; P.M. Sarro;
    In Topical meeting on Adaptive Optics, US Air Force,
    Albuquerque, USA, 1999.

  480. Various layouts of analog CMOS optical position-sensitive detectors
    D.W. de Lima Monteiro; G. Vdovin; P.M. Sarro;
    In Proc. SPIE Materials and Electronics for High-Speed and Infrared Detectors,
    Denver, pp. 134-142, Jul. 1999. ISBN 0-8194-3280-6.

  481. Micro-injection of b-D-glucose standards and Amplex Red reagent on micro-arrays
    R. Moerman; L.R. van den Doel; S. Picioreanu; J. Frank; J.C.M. Marijnissen; G. van Dedem; K.T. Hjelt; M J Vellekoop; P M Sarro; I.T. Young;
    In Proceedings SPIE,
    San Jose, pp. 119-128, Jan. 1999. ISBN 0-8194-3076-5.

  482. Fluorescence detection in (sub-)nanoliter microarrays
    L.R. van d. Doel; M.J. Vellekoop; P.M. Sarro; S. Picioreanu; R. Moerman; H. Frank; G. van Dedem; K. Hjelt; L.J. van Vliet; I.T. Young;
    In Proceedings SPIE,
    San Jose, pp. 28-39, Jan. 1999. ISBN 0-8194-3076-5.

  483. Recent progress in technology and applications of membrane micromachined deformable mirrors
    G. Vdovin; P.M. Sarro;
    In Proc. SPIE High-resolution wavefront control: methods, devices and applications,
    Denver, pp. 2-11, Jul. 1999. ISBN 0-8194-3246-6.

  484. IC-Compatible Two-level Bulk Micromachining for RF components
    N.P.Pham; K.T. Ng; J.M.W. Laros; T.L.M. Scholtes; P.M. Sarro; J.N. Burghartz;
    In J.P.Veen (Ed.), Proc.SAFE 99,
    Mierlo, The Netherlands, pp. 359-362, 1999. ISBN 90-73461-18-9.

  485. Thermal Conductivity Measurement on a SiC Thin Film
    A. Irace; P.M. Sarro;
    In Proc. XIII Eurosensors Conf.,
    The Hague, The Netherlands, pp. 809-812, Sept. 1999.

  486. All-Glass Microstructures for Biochemical Analysis Systems
    A. Berthold; L. Nicola; P.M. Sarro; M.J. Vellekoop; G. Pignatel;
    In Proc. XIII Eurosensors Conf.,
    The Hague, The Netherlands, pp. 975-978, Sept. 1999.

  487. Technology of Pixelated Flexible Silicon Structures for Spatial Light Modulators
    S. Sakarya; G. Vdovin; P.M. Sarro;
    In Proc. XIII Eurosensors Conf.,
    The Hague, The Netherlands, pp. 737-740, Sept. 1999.

  488. Piezoelectric ZnO Membrane Resonators for Liquid Property Sensing
    S. Koller; O. Brand; P.M. Sarro; M.J. Vellekoop; H. Baltes;
    In Proc. XIII Eurosensors Conf.,
    The Hague, The Netherlands, pp. 677-680, Sept. 1999.

  489. Design of Infrared Detector Arrays for Satellite Attitude Control
    A.W. van Herwaarden; F.G. van Herwaarden; S.A. Molenaar; B. Goudena; M. Laros; P.M. Sarro; C.A.Schot; W. van der Vlist; L. Blarre; J.P. Krebs;
    In Proc. XIII Eurosensors Conf.,
    The Hague, The Netherlands, pp. 309-316, Sept. 1999.

  490. Micromachined SLM based on pixelated reflective membranes
    S. Sakarya; G. Vdovin; P.M. Sarro;
    In Proc. SPIE Conf. on High-Resolution Wavefront Control,
    Denver, USA, pp. 23-31, Jul. 1999.

  491. Effect of Surfactant on Surface Quality of Silicon Microstructures Etched in Saturated TMAHW Solutions
    P.M. Sarro; D. Brida; W. van der Vlist; G. Pignatel; S.Brida;
    In Proc. XIII Eurosensors Conf.,
    The Hague, The Netherlands, pp. 389-392, Sept. 1999.

  492. Technology of pixelated reflective membranes for spatial light modulators
    S. Sakarya; G.Vdovin; P.M. Sarro;
    In J.P.Veen (Ed.), Proc. SAFE 99,
    Mierlo, The Netherlands, pp. 671-676, 1999. ISBN 90-73461-18-9.

  493. Position-sensitive detectors for a wavefront sensor
    D.W. de Lima Monteiro; G.Vdovin; P.M. Sarro;
    In J.P.Veen (Ed.), Proc. SAFE 99,
    Mierlo, The Netherlands, pp. 287-294, 1999. ISBN 90-73461-18-9.

  494. Glass-To-Glass Anodic Bonding
    A.Berthold; L.Nicola; P.M. Sarro; M.J.Vellekoop;
    In J.P.Veen (Ed.), Proc. SAFE 99,
    Mierlo, The Netherlands, pp. 33-36, 1999. ISBN 90-73461-18-9.

  495. Integration of a Hartmann-Shack wavefront sensor
    D.W. de Lima Monteiro; G. Vdovin; P.M. Sarro;
    In Proc. 2nd International Workshop on Adaptive Optics for Industry and Medicine,
    Durham, World Scientific, pp. 215-220, Jul. 1999. ISBN 981-02-4115-1.

  496. Lamb wave sensor with tensile ZnO Liquid Property Sensing
    S. Koller; O. Brand; H. Baltes; B.Jakoby; P.M. Sarro; M.J. Vellekoop;
    In Proc. 10th Int. Conf. Solid-State Transducers,
    Sendai, Japan, pp. 1512-1515, Jun. 1999.

  497. Silicon carbide as a new MEMS technology
    P.M. Sarro;
    In Proc. 10th Int. Conf. Solid-State Transducers,
    Sendai, Japan, The Institute of Electr. Eng. of Japan, pp. 186-189, Jun. 1999.

  498. A novel technological process for glaas-to-glass anodic bonding
    A. Berthold; L. Nicola; P.M. Sarro; M.J. Vellekoop;
    In Proc. 10th Int. Conf. Solid-State Transducers,
    Sendai, Japan, pp. 1324-1327, Jun. 1999.

  499. Fabrication of a focal plane array infrared detector for a satellite attitude control system
    A.W. van Herwaarden; F.G. van Herwaarden; S.A. Molenaar; B. Goudena; M. Laros; P.M. Sarro; C.A.Schot; W. van der Vlist; L. Blarre; J.P. Krebs;
    In Proc. 10th Int. Conf. Solid-State Transducers,
    Sendai, Japan, pp. 394-397, Jun. 1999.

  500. Offset reduction of Hall plates in three different crystal planes
    S. Bellekom; P.M. Sarro;
    Sensors and Actuators A,
    Volume 66, Issue 1-3 (1998), pp. 23-28, 1998.

  501. Anisotropic etching of silicon in saturated TMAHW solutions for IC-compatible micromachining
    P.M. Sarro; S. Brida; C.M.A. Ashruf; W. van d. Vlist; H. van Zeijl;
    Sensors and Materials,
    Volume 10, Issue 4, pp. 201-212, 1998.

  502. Thermo-optic effect exploitation in Silicon microstructures
    G. Cocorullo; F.G. Della Corte; I. Rendina; P. M. Sarro;
    Sensors and Actuators A,
    Volume 71, Issue 1-2, pp. 19-26, 1998. ISSN-0924-4247.

  503. Magnetic-field meassurement using an integrated resonant magnetic-field sensor
    Zs.Kadar; A.Bossche; P.M. Sarro; J.R.Mollinger;
    Sensors and Actuators A,
    Volume 70, pp. 225-232, 1998. ISSN-0924-4247.

  504. Low stress PECVD thin film SiC for IC compatible microstructures
    P.M. Sarro; C.R. de Boer; E. Korkmaz; J.W.M. Laros;
    Sensors and Actuators A,
    Volume 67, pp. 175-180, 1998.

  505. A microgap photomultiplier for the read-out of LaF3 : Nd (10%) scintillator
    J. van der Marel; V.R.Bom; C.W.E. van Eijk; R.W. Hollander; P.M Sarro;
    Nucl. Instr. and Meth. Phys.Res. A,
    Volume 410, pp. 229-237, 1998. ISSN 0168-9002.

  506. Design and characterization of MicroGap Counters on silicon
    F.D. van d. Berg; J. van d. Marel; C.W.E. van Eijk; R.W. Hollander; P.M. Sarro;
    Nucl Instr and Meth. A.,
    Volume 409, pp. 90-94, 1998.

  507. Two silicon optical modulators realizable with a fully compatible bipolar process
    G. Breglio; A. Cutolo; A. Irace; P. Spirito; L. Zeni; M. Iodice; P.M. Sarro;
    IEEE Journal of Quantum Electronics vol. 4,
    Issue 6, pp. 1003-1010, 1998.

  508. Silicon-on-silicon rib waveguides with a high-confining ion-implanted lower cladding
    G. Cocorullo; F.G. Della Corte; M. Iodice; I. Rendina; P.M. Sarro;
    IEEE Journal of Quantum Electronics,
    Volume 4, Issue 6, pp. 983-989, 1998.

  509. Enhancement of propagation characteristics in all-silicon waveguide by ion implantation
    G. Cocorullo; F.G. Della Corte; M. Iodice; I. Rendina; P.M. Sarro;
    In OSA Intern. Symposium on Integrated Photonics Research,
    Victoria, Canada, pp. 339-341, 1998.

  510. A novel technique to measure the thermal conductivity of thin film membranes
    A. Irace; P.M. Sarro;
    In Proc.SPIE Micromachining and Microfabrication 1998 Symposium,
    Santa Clara, USA, SPIE, pp. 367-373, Sep. 1998.

  511. Fluorescence Detection in (sub)-nanoliter Microarrays
    L.R. van d. Doel; M.J. Vellekoop; P.M. Sarro; S. Picioreanu; R. Moerman; H. Frank; G. van Dedem; K. Hjelt; I.T. Young;
    In Proc. 4th Annual Conference of the Advanced School for Computing and Imaging (ASCI 98),
    Lommel, Belgium, pp. 58-62, Jun. 1998.

  512. Determination of mechanical properties of piezoelectric ZnO films
    S. Koller; V.Ziebart; O. Paul; O. Brand; H. Baltes; P.M. Sarro; M.J. Vellekoop;
    In Proc. SPIE Smart Electronics and MEMS Symposium,
    San Diego, USA, SPIE, pp. 102-109, Mar. 1998.

  513. Low temperature quartz-to-silicon bonding for SAW applications
    A.Berthold; P.M. Sarro; M.J.Vellekoop;
    In Proc. SPIE Smart Electronics and MEMS Symposium,
    San Diego, USA, SPIE, pp. 81-85, Mar. 1998.

  514. Quartz-to-silicon fusion bonding for micro acoustic wave applications
    A. Berthold; P.M. Sarro; M.J. Vellekoop;
    In Proc. Dutch Sensor Conf,
    Twente, pp. 213-218, Mar. 1998.

  515. Measurement of thermal conductivity and diffusivity on single and multi-layer membranes
    A. Irace; P.M. Sarro;
    In Proc. Eurosensors XII Conf.,
    Southampton, UK, pp. 27-30, Sep. 1998.

  516. A neutron detector based on the Micro Gap Counter
    F.D. van den Berg; V.R. Bom; C.W.E. van Eijk; R.W. Hollander; M. Bartek; P.M. Sarro; H. Schellevis; M.W. Johnson; N.J. Rhodes;
    In C.W.E. van Eijk (Ed.), Proc. Neudess 98,
    Delft, The Netherlands, Oct. 1998. ISBN 90-73861-42.

  517. Silicon Micromachining Technologies
    P.M. Sarro;
    In INSEL 98 Conf.,
    Naples, Italy, Oct. 1998.

  518. Experimental results of electron confinement in a silicon drift detector with saw tooth shaped p+ strips
    J. Sonsky; H. Valk; J. Huizenga; and R.W. Hollander; C.W.E. van Eijk; P.M. Sarro;
    In IEEE Nuclear Science Symposium 98,
    Toronto, Canada, Nov. 1998.

  519. Silicon Microsensors and Optical Switches Based on the Thermo-Optic Effect
    G. Cocorullo; F. G. Della Corte; M. Iodice; I. Rendina; P.M. Sarro;
    In CIMTEC 98,
    Florence, Italy, Jun. 1998.

  520. An integrated silicon interferometric temperature sensor
    G. Cocorullo; F.G. Della Corte; M. Iodice; I. Rendina; P.M. Sarro;
    Sensors and Actuators A,
    Volume 61, Issue 1-3, pp. 267-272, 1997.

  521. Backside-illuminated silicon photodiode array in an integrated spectrometer
    T.A. Kwa; . P.M. Sarro; R.F. Wolffenbuttel;
    IEEE Transactions on Electron Devices,
    Volume 44, Issue 5 (1997), pp. 761-765, 1997.

  522. A temperature all-silicon micro-sensor based on the thermo-optic effect
    G. Cocorullo; F.G. Della Corte; M. Iodice; I. Rendina; P.M. Sarro;
    IEEE Transactions on Electron Devices,
    Volume 44, Issue 5 (1997), pp. 766-774, 1997.

  523. Electrostatic aluminum micromirrors using double pass metallization
    J. B�hler; J. Funk; J.G. Korvink; F.-P. Steiner; P.M. Sarro; H. Baltes;
    Journal of Microelectromechanical Systems,
    Volume 6, Issue 2, pp. 126-135, 1997.

  524. Technology and applications of micromachined silicon adaptive mirrors
    G. Vdovin; S. Middelhoek; P.M. Sarro;
    Opt. Eng.,
    Volume 36, Issue 5, pp. 1382-1390, 1997.

  525. An integrated charge amplifier for a pyroelectric sensor
    D. Setiadi; A. Armitage; T.D. Binnie; P.P.L. Regtien; P.M. Sarro;
    Sensors and Actuators A,
    Volume 61, Issue 1-3, pp. 421-426, 1997.

  526. Silicon thermooptic micromodulators for low-cost low-performance fiber-in-the-loop applications
    G. Cocorullo; F.G. Della Corte; I. Rendina; P.M. Sarro;
    In Proc.SPIE Integrated Optic Devices '97 Symposium,
    San Jose, California, USA, SPIE, pp. 312-337, 1997.

  527. Low stress PECVD thin film SiC for IC compatible microstructures
    P.M. Sarro; C.R. de Boer; M. Laros; E. Korkmaz;
    In Proc. Eurosensors '97 Conf.,
    Warsaw, Poland, pp. 920-932, Sep. 1997.

  528. Temperature dependence and drift of a thermal accelerometer
    U.A. Dauderstadt; P.M. Sarro; S. Middelhoek;
    In Proc. 9th Int. Conf. Solid-State Transducers,
    Chicago, USA, pp. 1209-1212, Jun. 1997.

  529. Development of a 128 channel silicon drift detector for spectroscopic purposes
    H. Valk; J. Huizenga; C.W. van Eijk; R.W.Hollander; L.K. Nanver; P.M. Sarro; A. van den Bogaard;
    In Proc. 4th International Conference on Position-Sensitive Detectors,
    Manchester, UK, pp. 169-172, Sept. 1997.

  530. Recombination centers identification in very thin silicon epitaxial layers via lifetime measurements
    S. Daliento; A. Sanseverino; P. Spirito; P.M. Sarro; L. Zeni;
    IEEE Electr. De van Lett,
    Volume 17, Issue 3, pp. 148-150, 1996.

  531. Silicon three-axial tactile sensor
    Z.Chu; P.M. Sarro; S. Middelhoek;
    Sensors and Actuators A,
    Volume 54, pp. 505-510, 1996.

  532. The PhotoElectroMagnetic Effect in planar silicon structures
    J.F. Creemer; S. Middelhoek; P.M. Sarro;
    Sensors and Actuators A,
    Volume 55, pp. 115-120, 1996.

  533. Low temperature surface passivation for silicon solar cells
    C. Leguijt; P. L�lgen; A.R. Burgers; J.A. Eikelboom; A.W. Weeber; F.M. Schuurmans; W.C. Sinke; P.F.A. Alkemade; P.M. Sarro; C.H.M. Mar�e; L.A. Verhoef;
    Solar Energy Materials and Solar Cells,
    Volume 40 (1996), pp. 297-345, 1996.

  534. A 3x1 integrated pyroelectric sensor based on VDF/TrFE copolymer
    D. Setiadi; P.M. Sarro; P.P.L. Regtien;
    Sensors and Actuators A,
    Volume 52, pp. 103-109, 1996.

  535. Simulation aspects of a thermal accelerometer
    U.A. Dauerstadt; P.H.S. de Vries; R. Hiratsuka; J.G. Korvink; P.M. Sarro; H. Baltes; S. Middelhoek;
    Sensors and Actuators A,
    Volume 55 (1996), pp. 3-6, 1996.

  536. Integrated ultraviolet sensor system with on-chip 1 Gohm Transimpedance Amplifier
    D. Bolliger; P. Malcovati; A. Haberli; P.M. Sarro; F. Malobert; H. Baltes;
    In ISSC 96 Digest of Technical Papers,
    San Francisco, CA, pp. 328-329, Feb. 1996.

  537. Anisotropic etching of silicon in saturated TMAHW solutions for IC-compatible micromachining
    P.M. Sarro; S.Brida; C.M.A.Ashruf; W. van d.Vlist; H. van Zeijl;
    In Proc. ASDAM '96 Conf.,
    Smolenice, Slovakia, pp. 293-296, Oct. 1996.

  538. A LaF3:Nd(10%) scintillator detector with microgap gas chamber read-out for the detection of x- rays
    J. van der Marel; V.R. Bom; C.W.E. van Eijk; R.W. Hollander; P.M. Sarro;
    In Proc. 4th International Conference on Position-Sensitive Detectors,
    Manchester, UK, Sept. 1996.

  539. An integrated silicon interferometric temperature sensor
    G. Cocorullo; F.G. Della Corte; M. Iodice; I. Rendina; P.M. Sarro;
    In Proc. Eurosensors '96 Conf.,
    Leuven, Belgium, pp. 1413-1416, Sep. 1996.

  540. An integrated charge amplifier for a pyroelectric sensor
    D. Setiadi; A. Armitage; T.D. Binnie; P.P.L. Regtien; P.M. Sarro;
    In Proc. Eurosensors '96 Conf.,
    Leuven, Belgium, pp. 355-358, Sep. 1996.

  541. Micromachined mirror with a variable focal distance
    G.Vdovin; S. Middelhoek; P.M. Sarro;
    In Tech. Digest EOS Free Space Micro-Optical Systems,
    Engelberg, Switzerland, pp. 28-29, Apr. 1996.

  542. Thin-film free-space optical components micromachined in silicon
    G.Vdovin; S. Middelhoek; P.M. Sarro;
    In Techn Digest IEEE/LEOS Summer Topical Meeting Optical MEMS and Their Applications,
    Keystone, Colorado, USA, pp. 5-6, Aug. 1996.

  543. Silicon drift detectors for the detection of X- and g- rays
    H.Valk; E.A.Hijzen; J.Huizenga; C.W. van Eijk; R.W.Hollander; L.K.Nanver; P.M. Sarro; A. van d.Bogaard; J.Slabbekoorn;
    In Proc. National Sensor Conference,
    Delft, The Netherlands, pp. 103-107, Mar. 1996.

  544. Aluminum passivation in saturated TMAHW solutions for IC-compatible microstructures and device isolation
    P.M. Sarro; S. Brida; W. van der Vlist;
    In Proc.SPIE Micromachining and Microfabrication �96 Symposium,
    Austin, Texas, USA, SPIE, pp. 242-250, Oct. 1996.

  545. Temperature monitoring with a fully integrable on chip interferometric silicon micro-sensor based on the thermo-optic effect
    G. Cocorullo; F.G. Della Corte; M. Iodice; I. Rendina; P.M. Sarro;
    In Proc. MELECON '96,
    Bari, Italy, pp. 1321-1323, May 1996.

  546. Realization of an integrated VDF/TrFE copolymer-on-silicon pyroelectric sensor
    D. Setiadi; P.P.L. Regtien; P.M. Sarro;
    Microelectronic Engineering,
    Volume 29, Issue 1-4, pp. 85-88, Dec. 1995.

  547. Silicon accelerometer based on thermopiles
    U.A. Dauderstadt; P.H.S. de Vries; R. Hiratsuka; P.M. Sarro;
    Sensors and Actuators A: Physical,
    Volume 46, Issue 1-3, pp. 201-204, Jan.-Feb. 1995.

  548. Technology characterization and application of adaptive mirrors fabricated with IC-compatible micromachining
    G. Vdovin; S. Middelhoek; M. Bartek; P.M. Sarro; D. Solomatine;
    In Proc. SPIE,
    San Diego, CA, USA, pp. 116-129, Jun. 1995.

  549. Evaluation of liquid properties using a silicon lamb wave sensor
    M.J. Vellekoop; G.W. Lubking; P.M. Sarro;
    Sensors and Actuators A: Physical,
    Volume 43, Issue 1-3, pp. 175-180, May 1994.

  550. Integrated-circuit-compatible design and technology of acoustic-wave-based microsensors
    M.J. Vellekoop; G.W. Lubking; P.M. Sarro;
    Sensors and Actuators A: Physical,
    Volume 44, Issue 3, pp. 249-263, Sep. 1994.

  551. Liquid and gas micro-calorimeters for (bio)chemical measurements
    A. W. van Herwaarden; P.M. Sarro; J.W. Gardner; P. Bataillard;
    Sensors and Actuators A: Physical,
    Volume 43, Issue 1-3, pp. 24-30, May 1994.

  552. Application of electrostatic feedback to critical damping of an integrated silicon capacitive accelerometer
    R.P. van Kampen; M.J. Vellekoop; P.M. Sarro; R.F. Wolffenbuttel;
    Sensors and Actuators A: Physical,
    Volume 43, Issue 1-3, pp. 100-106, May 1994.

  553. A silicon-silicon nitride membrane fabrication process for smart thermal sensors
    P.M. Sarro; A.W. van Herwaarden; W. van der Vlist;
    Sensors and Actuators A: Physical,
    Volume 42, Issue 1-3, pp. 666-671, Apr. 1994.

  554. Application of VDF/TrFE copolymer for pyroelectric image sensors
    D. Setiadi; P.P.L. Regtien; P. M. Sarro;
    Sensors and Actuators A: Physical,
    Volume 42, Issue 1-3, pp. 585-592, Apr. 1994.

  555. A pyroelectric matrix sensor using PVDF on silicon containing FET readout circuitry
    P.C.A. Hammes; P.P.L. Regtien; P.M. Sarro;
    Sensors and Actuators A: Physical,
    Volume 37-38, pp. 290-295, Jun.-Aug. 1993.

  556. Design considerations for the thermal accelerometer
    R. Hiratsuka; D.C. van Duyn; T. Otaredian; P. de Vries; P.M. Sarro;
    Sensors and Actuators A: Physical,
    Volume 32, Issue 1-3, pp. 380-385, Apr. 1992.

  557. Sensor technology strategy in silicon
    P.M. Sarro;
    Sensors and Actuators A: Physical,
    Volume 31, Issue 1-3, pp. 138-143, Mar. 1992.

  558. Design considerations for a permanent-rotor-charge-excited micromotor with an electrostatic bearing
    R.F. Wolffenbuttel; J.F.L. Goosen; P.M. Sarro;
    Sensors and Actuators A: Physical,
    Volume 27, Issue 1-3, pp. 597-603, May 1991.

  559. Compatibility of zinc oxide with silicon IC processing
    M.J. Vellekoop; C.C.G. P. Visser.M. Sarro;
    Sensors and Actuators A: Physical,
    Volume 23, Issue 1-3, pp. 1027-1030, Apr. 1990.

  560. Integrated thermopile sensors
    A.W. van Herwaarden; D.C. van Duyn; B.W. van Oudheusden; P.M. Sarro;
    Sensors and Actuators A: Physical,
    Volume 22, Issue 1-3, pp. 621-630, Jun. 1989.

  561. Sensor array with A/D conversion based on flip-flops
    W. Lian; S.E. Wouters; D.A. Aupers; P.M. Sarro;
    Sensors and Actuators A: Physical,
    Volume 22, Issue 1-3, pp. 592-597, Jun. 1989.

BibTeX support