dr. G. Fiorentino

1. A calorimetry-based measurement apparatus for switching losses in high power electronic devices
   D. Iero; F.G. Della Corte; G. Fiorentino; P.M. Sarro;
   In IEEE International Energy Conference,
   pp. 1-5, 2016.

2. Impact of the atomic layer deposition precursors diffusion on solid-state carbon nanotube based supercapacitors performances
   G Fiorentino; S Vollebregt; FD Tichelaar; R Ishihara; PM Sarro;
   IOP Nanotechnology,
   Volume 26, Issue 6, pp. 064002, 2015.
   document

3. Role of atomic layer deposited aluminum oxide as oxidation barrier for silicon based materials
   G. Fiorentino; B. Morana; S. Forte; P.M .Sarro;
   Journal of Vacuum Science and Technology A,
   Volume 33, pp. 01A142, 2015.

4. A measurement apparatus for switching losses based on an heat-flux sensor
   Iero, Demetrio; Della Corte, Francesco G.; Fiorentino, Giuseppe; Sarro, Pasqualina M.; Morana, B.;
   In AISEM Annual Conference,
   pp. 1-4, 2015.

5. On-chip double slot antenna at 300 GHz enhanced by artificial dielectrics
   Syed, W. H.; Fiorentino, G.; Cavallo, D.; Sarro, P. M.; Neto, A.;
   In Eur. Conf. Antennas Propag.,
   2015.

6. Performance enhancement of 300 GHz on-chip double slot antenna by means of artificial dielectrics
   Syed, W. H.; Fiorentino, G.; Cavallo, D.; Sarro, P. M.; Neto, A.; Lager, I. E.;
   In 45th European Microwave Conference,
   2015.

7. High Aspect-Ratio MEMS Devices for the next generation of THZ/MHZ Passive Components
   Giuseppe Fiorentino;
   PhD thesis, Delft University of Technology, 2015.
   document

8. Stiction-Induced Sealing of Surface Micromachined Channels
   B Morana; RH Poelma; G Fiorentino; J Wei; JF Creemer; PM Sarro;
   Journal of Microelectromechanical Systems,
   Volume 23, Issue 2, pp. 459-470, 2014.
   document

9. Front-to-back ratio enhancement of on-chip antenna using artificial dielectrics at 300 GHz
   Syed, WH; Fiorentino, G; Cavallo, D; Spirito, M; Neto, A; Sarro, PM;
   In Proceedings - 2014 USNC-URSI Radio Science Meeting (Joint with AP-S Symposium),
   pp. 140, 2014.

10. Artificial Dielectric Layer Based on PECVD Silicon Carbide for Terahertz Sensing Applications
    G. Fiorentino; W. Syed; A. Adam; A. Neto; P.M. Sarro;
    In Procedia Engineering 87: EUROSENSORS 2014, the 28th European Conference on Solid-State Transducers,
    pp. 1497-1500, 2014.

11. Enhancement of Front to Back Ratio of on Chip Antenna by Artificial Dielectrics at 300 GHz
    Syed, WH; Fiorentino, G; Cavallo, D; Spirito, M; Neto, A; Sarro, PM;
    In 39th International Conference on Infrared, Millimeter, and Terahertz Waves,
    2014.

12. 3D solid-state supercapacitors obtained by ALD coating of high-density carbon nanotubes bundles
    Fiorentino, Giuseppe; Vollebregt, Sten; Tichelaar, FD; Ishihara, Ryoichi; Sarro, Pasqualina M;
    In Micro Electro Mechanical Systems (MEMS), 2014 IEEE 27th International Conference on,
    IEEE, pp. 342--345, 2014.

13. CNT bundles growth on microhotplates for direct measurement of their thermal properties
    C. Silvestri; B. Morana; G. Fiorentino; S. Vollebregt; G. Pandraud; F. Santagata; GuoQi Zhang; P.M. Sarro;
    In 27th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2014),
    San Francisco, USA, Jan. 2014.
    document

14. Fully back-end TSV process by Cu electro-less plating for 3D smart sensor systems
    F. Santagata; C. Farriciello; G. Fiorentino; H.W. van Zeijl; C. Silvestri; GuoQi Zhang; P.M. Sarro;
    Journal of Micromechanics and Microengineering,
    2013.

15. A CMOS-compatible metamaterial to enhance the front to back radiation ratio in terahertz antenna for sensing application
    Fiorentino, G; Syed, W; Santagata, F; Spirito, M; Pandraud, G; Neto, A; Sarro, PM; Adam, AJL;
    In Sensors, 2013 IEEE,
    IEEE, pp. 1--4, 2013.

16. Ald aluminum oxide as protective coating against oxidation of LPCVD SiC microhotplates
    Morana, B; Fiorentino, G; Pandraud, G; Creemer, JF; Sarro, PM;
    In Micro Electro Mechanical Systems (MEMS), 2013 IEEE 26th International Conference on,
    IEEE, pp. 484--487, 2013.

17. Heat flux sensor for power loss measurements of switching devices
    Iero, Demetrio; Corte, Francesco G Della; Fiorentino, Giuseppe; Sarro, Pasqualina M; Morana, B;
    In Thermal Investigations of ICs and Systems (THERMINIC), 2013 19th International Workshop on,
    IEEE, pp. 327--330, 2013.

18. Luminescence quenching of porous silicon nanoparticles in presence of ascorbic acid
    La Ferrara, Vera; Fiorentino, Giuseppe; Rametta, Gabriella; Di Francia, Girolamo;
    physica status solidi (a),
    Volume 209, Issue 4, pp. 736--740, 2012.

19. Multilayer conformal coating of highly dense Multi-Walled Carbon Nanotubes bundles
    G. Fiorentino; S. Vollebregt; R. Ishihara; P.M. Sarro;
    In 2012 12th IEEE Conference on Nanotechnology (IEEE-NANO),
    Birmingham, UK, Aug. 2012. ISBN 978-1-4673-2198-3; DOI 10.1109/NANO.2012.6322054.

20. Fully back-end TSV process by Cu electro-less plating for 3D smart sensor systems
    F. Santagata; G. Fiorentino; M. Nie; C. Farriciello; R. Poelma; GuoQi Zhang; P.M. Sarro;
    In Proc. 11th IEEE Sensors Conference,
    Taipei, Taiwan, pp. 668-671, Oct 2012.

21. Nanopatterned platinum electrodes by focused ion beam in single palladium nanowire based devices
    La Ferrara, Vera; Alfano, Brigida; Fiorentino, Giuseppe; Polichetti, Tiziana; Massera, Ettore; Di Francia, Girolamo;
    Microelectronic Engineering,
    Volume 88, Issue 11, pp. 3261--3266, 2011.

22. Luminescent Porous Silicon Nanoparticles as Drug Carrier
    La Ferrara, Vera; Di Francia, Girolamo; Fiorentino, Giuseppe;
    In Sensors and Microsystems,
    Springer, 2011.

23. Single Palladium Nanowire: Morphology and its Correlation with Sensing Mechanism
    La Ferrara, Vera; Alfano, Brigida; Polichetti, Tiziana; Massera, Ettore; Di Francia, Girolamo; Fiorentino, Giuseppe;
    In Sensors and Microsystems,
    Springer, 2011.

BibTeX support