dr. E. Iervolino

1. Characterization of an Acetone Detector based on a Suspended WO3-Gate AlGaN/GaN HEMT Integrated with Micro-heater
   Jianwen Sun; Robert Sokolovskij; Elina Iervolino; Fabio Santagata; Zewen Liu; Pasqualina M. Sarro; GuoQi Zhang;
   IEEE Transactions on Electron Devices,
   2019. DOI: 10.1109/TED.2019.2936912
   document

2. Suspended AlGaN/GaN HEMT NO2 Gas Sensor Integrated with Micro-heater
   Jianwen Sun; Robert Sokolovskija; Elina Iervolino; Zewen Liu; Pasqualina M. Sarro; GuoQi Zhang;
   Journal of Microelectromechanical Systems,
   2019.
   document

3. Hydrogen sulfide detection properties of Pt-gated AlGaN/GaN HEMT-sensor
   Sokolovskij, R.; Zhang, J.; Iervolino, E.; Zhao, C.; Santagata, F.; Wang, F.; Yu, H.; Sarro, P. M.; GuoQi Zhang;
   Sensors and Actuators B: Chemical,
   2018. DOI: 10.1016/j.snb.2018.08.015

4. Integrated virtual impactor enabled PM 2.5 sensor
   Mingzhi Dong; E Iervolino; F Santagata; G Zhang; GuoQi Zhang;
   IEEE Sensors Journal,
   Volume 17, Issue 9, pp. 2814-2821, 2017.

5. Pt-AlGaN/GaN HEMT-Sensor for Hydrogen Sulfide (H2S) Detection
   R Sokolovskij; E Iervolino; C Zhao; F Santagata; F Wang; H Yu; PM Sarro; GuoQi Zhang;
   In Proceedings of Eurosensors,
   pp. 463, 2017.

6. Silicon microfabrication based particulate matter sensor
   Mingzhi Dong; Elina Iervolino; Fabio Santagata; GuoQi Zhang;
   Sensors and Actuators A: Physical,
   Volume 247, pp. 115-124, 2016.

7. Precision recess of AlGaN/GaN with controllable etching rate using ICP-RIE oxidation and wet etching
   R. Sokolovskij; J. Sun; F. Santagata; E. Iervolino; S. Li; G.Y. Zhang; P.M.Sarro; GuoQi Zhang;
   In Procedia Engineering: Proceedings of the 30th anniversary Eurosensors Conference,
   pp. 1094-1097, 2016.

8. Miniaturized particulate matter sensor for portable air quality monitoring devices
   Xueming Li; E Iervolino; F Santagata; Jia Wei; Cadmus Yuan; PM Sarro; GuoQi Zhang;
   In IEEE Sensors,
   pp. 2151-2154, 2014.

9. Resonance frequency of locally heated cantilever beams
   E. Iervolino; M. Riccio; F. Santagata; J. Wei; A.W. van Herwaarden; A. Irace; G. Breglio; P.M. Sarro;
   Sensors and Actuators A,
   Volume 190, pp. 6-12, Feb. 2013. DOI 10.1016/j.sna.2012.10.008.

10. A molybdenum MEMS microhotplate for high-temperature operation
    L. Mele; F. Santagata; E. Iervolino; M. Mihailovic; T. Rossi; A.T. Tran; H. Schellevis; J.F. Creemer; P.M. Sarro;
    Sensors and Actuators A,
    2012. DOI 10.1016/j.sna.2011.11.023.

11. Tube-shaped Pirani gauge for in situ hermeticity monitoring of SiN thin-film encapsulation
    F. Santagata; J.F. Creemer; E. Iervolino; P.M. Sarro;
    Journal of Micromechanics and Microengineering,
    Volume 22, Issue 10, Sep. 2012. DOI 10.1088/0960-1317/22/10/105025.

12. Analyzing protein denaturation using fast differential scanning calorimetry
    R. Splinter; A.W. van Herwaarden; E. Iervolino; G. Vanden Poel; D. Istrate; P.M. Sarro;
    In R. Walczak; J. Dziuban (Ed.), Proc. Eurosensors XXVI,
    Krakow, Poland, Procedia Engineering, pp. 140-143, Sep 2012. DOI 10.1016/j.proeng.2012.09.104.

13. Fully integrated MEMS TGA device for inspection of nano-masses
    E. Iervolino;
    PhD thesis, Delft University of Technology, May 2012. ISBN 9789462030312; Promotor: prof.dr. P.M. Sarro.

14. Temperature calibration and electrical characterization of the differential scanning calorimeter chip UFS1 for the Mettler-Toledo Flash DSC 1
    E. Iervolino; A.W. van Herwaarden; F.G. van Herwaarden; E. van de Kerkhof; P.P.W. van Grinsven; A.C.H.I. Leenaers; V.B.F. Mathot; P.M. Sarro;
    Thermochimica Acta,
    Volume 522, Issue 1-2, pp. 53-59, Aug. 2011. DOI 10.1016/j.tca.2011.01.023.

15. Design, performance and analysis of thermal lag of the UFS1 twin-calorimeter chip for fast scanning calorimetry using the Mettler-Toledo Flash DSC 1
    A.W. van Herwaarden; E. Iervolino; F.G. van Herwaarden; T. Wijffels; A. Leenaers; V.B.F. Mathot;
    Thermochimica Acta,
    Volume 522, Issue 1-2, pp. 46-52, Aug. 2011. DOI 10.1016/j.tca.2011.05.025.

16. An analytical model and verification for MEMS Pirani gauges
    F. Santagata; E. Iervolino; L. Mele; A.W. van Herwaarden; J.F. Creemer; P.M. Sarro;
    Journal of Micromechanics and Microengineering,
    Volume 21, Issue 11, pp. 1-7, 2011. DOI 10.1088/0960-1317/21/11/115007.

17. MEMS for thermogravimetry: Fully integrated device for inspection of nanomasses
    E. Iervolino; A.W. van Herwaarden; W. van der Vlist; P.M. Sarro;
    IEEE/ASME Journal of Microelectromechanical Systems,
    Volume 20, Issue 6, pp. 1277-1286, Dec. 2011. DOI 10.1109/JMEMS.2011.2167672.

18. A tube-shaped buried Pirani gauge for low detection limit with small footprint
    F. Santagata; J.F. Creemer; E. Iervolino; L. Mele; A.W. van Herwaarden; P.M. Sarro;
    IEEE Journal of Microelectromechanical Systems,
    Volume 20, Issue 3, pp. 676-684, Jun. 2011. DOI 10.1109/JMEMS.2011.2127457.

19. Sputtered molybdenum as conductive material for high-temperature microhotplates
    L. Mele; F. Santagata; E. Iervolino; M. Mihailovic; T. Rossi; A.T. Tran; H. Schellevis; J.F. Creemer; P.M. Sarro;
    In 16th International Solid-State Sensors, Actuators and Microsystems Conference (TRANSDUCERS 2011),
    Beijing, China, pp. 2690-2693, Jun. 2011. ISBN 978-1-4577-0157-3; DOI 10.1109/TRANSDUCERS.2011.5969500.

20. Self-cleaning mass calibration of a thermogravimetric device using a thin-film molybdenum
    E. Iervolino; L. Mele; F. Santagata; A.W. van Herwaarden; W. van der Vlist; J.F. Creemer; P.M. Sarro;
    In 16th International Solid-State Sensors, Actuators and Microsystems Conference (TRANSDUCERS 2011),
    Beijing, China, pp. 1038-1041, Jun. 2011. ISBN 978-1-4577-0157-3; DOI 10.1109/TRANSDUCERS.2011.5969167.

21. Electro-thermal analysis of MEMS microhotplates for the optimization of temperature uniformity
    L. Mele; T. Rossi; M. Riccio; E. Iervolino; F. Santagata; A. Irace; G. Breglio; J.F. Creemer; P.M. Sarro;
    In C. Tsamis; G. Kaltas (Ed.), Proc. Eurosensors XXV,
    Athens, Greece, Procedia Engineering, pp. 387-390, Sep. 2011. DOI 10.1016/j.proeng.2011.12.096.

22. An all-in-one nanoreactor for high-resolution microscopy on nanomaterials at high pressures
    J.F. Creemer; F. Santagata; B. Morana; L. Mele; T. Alan; E. Iervolino; G. Pandraud; P.M. Sarro;
    In Proc. 24th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2011),
    Cancun, Mexico, IEEE, pp. 1103-1106, Jan. 2011. ISBN 978-1-4244-9633-4; DOI 10.1109/MEMSYS.2011.5734622.

23. A novel 3-D tube-shaped buried poly-Si Pirani gauge for extended dynamic range with small footprint
    Santagata; F.; E. Iervolino; Laros; J.M.W.; Groeneweg; J.; Creemer; J.F.; van Herwaarden; A.W.; P.M. Sarro and;
    In Y. Suzuki; Man Wong (Ed.), Proceedings of IEEE MEMS 2010 Conference,
    Wanchai, Hong Kong, IEEE, pp. 643-646), 2010.

24. Thermogravimetric Device with Integrated Thermal Actuators
    E. Iervolino; A.W. van Herwaarden; W. van der Vlist; P.M. Sarro.;
    In Proceedings MEMS2010,
    Hong Kong, China, pp. 683-686, Jan. 2010.

25. Dual-inlet microfluidic calorimeter for thermal characterization of bio-chemical solutions
    T. Adrega; E. Iervolino; A.W. van Herwaarden; P.M. Sarro.;
    In BIOSENSORS 2010, 20th Anniversary World Congress on Biosensors,
    Glasgow, UK, May 2010.

26. Temperature Dependence of the Resonance Frequency of Thermogravimetric Devices
    E. Iervolino; M. Riccio; A.W. van Herwaarden; A. Irace; G. Breglio; W. van der Vlist; P.M. Sarro.;
    In Eurosensors XXIV,
    Linz, Austria, Sep. 2010.

27. Calorimeter chip calibration for thermal characterization of liquid samples
    E. Iervolino; A.W. van Herwaarden;
    Thermochimica acta,
    Volume 492, Issue 1-2, pp. 95-100, 2009.

28. Thermal analysis of peptides with a calorimeterchip
    E. Iervolino; I.M.O. Finoulst; A.W. van Herwaarden; W.H.A. Wien; P.D.E. Verhaert; P.M. Sarro;
    In Proceedings of 15th international conference on solid-state sensors, actuators & microsystems,
    2009.
    document

29. Temperature Calibration of Fast Scan Calorimeter Chips.
    E. Iervolino; A.W. van Herwaarden; P.M. Sarro;
    In Proceedings Eurosensors XXII,
    Dresden, Germany, Sep. 2008.

BibTeX support